PartsTable
Technical Data Sheet
Download PDF

134AMM10013-5 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

134AMM10013-5: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7075 OVERALL, end_radius: 0.562 INCHES NOMINAL IN, fork_depth: 1.375 INCHES NOMINAL IN, thread_class: 3B ROD CONNECTION, hole_diameter: 0.3747 INCHES MINIMUM AND 0.3757 INCHES MAXIMUM IN, overall_width: 1.312 INCHES MINIMUM AND 1.317 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-188-9808, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
134AMM10013-5
NSN: 5340-00-188-9808
FSC: 5340 — Hardware, Commercial
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 7075 OVERALL
end_radius0.562 INCHES NOMINAL IN
fork_depth1.375 INCHES NOMINAL IN
thread_class3B ROD CONNECTION
hole_diameter0.3747 INCHES MINIMUM AND 0.3757 INCHES MAXIMUM IN
overall_width1.312 INCHES MINIMUM AND 1.317 INCHES MAXIMUM IN
thread_length2.000 INCHES NOMINAL ROD CONNECTION IN
overall_height1.124 INCHES NOMINAL IN
fork_span_width0.938 INCHES MINIMUM AND 0.943 INCHES MAXIMUM IN
thread_directionRIGHT-HAND ROD CONNECTION
surface_treatmentCHROMATE ZINC OVERALL
fork_arm_thickness0.187 INCHES NOMINAL IN
NSN5340-00-188-9808
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 134AMM10013-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.938 INCHES MINIMUM AND 0.943 INCHES MAXIMUM IN
•
SECURING PIN HOLE DIAMETER: 0.068 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.187 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-P-6808 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
END RADIUS: 0.562 INCHES NOMINAL IN
•
THREAD LENGTH: 2.000 INCHES NOMINAL ROD CONNECTION IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/9,T73 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.124 INCHES NOMINAL IN
FORK SPAN WIDTH0.938 INCHES MINIMUM AND 0.943 INCHES MAXIMUM IN
SECURING PIN HOLE DIAMETER0.068 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
FORK ARM THICKNESS0.187 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-6808 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
END RADIUS0.562 INCHES NOMINAL IN
THREAD LENGTH2.000 INCHES NOMINAL ROD CONNECTION IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/9,T73 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH1.312 INCHES MINIMUM AND 1.317 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 134AMM10013-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 134AMM10013-5?
134AMM10013-5 is a CLEVIS,ROD END.
What is the NSN for 134AMM10013-5?
134AMM10013-5 is cataloged in the U.S. Government catalog under NSN 5340-00-188-9808. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 134AMM10013-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.