PartsTable
Technical Data Sheet
Download PDF

13483 — PLATE,RETAINING,ELECTRICAL CONNE

✓ Government record, cited
Clementoni · ORING SEAL
PRODUCT OVERVIEW

13483: PLATE,RETAINING,ELECTRICAL CONNE.

PLATE,RETAINING,ELECTRICAL CONNE. Key specifications include ratchet: NOT INCLUDED, material: STEEL OVERALL, bore_shape: STRAIGHT, hub_length: 1.000 INCHES NOMINAL IN, bore_diameter: 13.00 MILLIMETERS NOMINAL MM, overall_width: 7.0 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-389-5157, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13483
NSN: 5340-00-389-5157
NIINs: 003895157, 005543217, 011223117, 012859062
FSC: 5340 — Hardware, Commercial
CAGE: 28873 — ITW FOOD EQUIPMENT GROUP LLC DBA HOBART SERVICE (USA)
SPECIFICATIONS
ratchetNOT INCLUDED
materialSTEEL OVERALL
bore_shapeSTRAIGHT
hub_length1.000 INCHES NOMINAL IN
bore_diameter13.00 MILLIMETERS NOMINAL MM
overall_width7.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
overall_height2.000 INCHES NOMINAL IN
spoke_quantity4
surface_finishGROUND
handwheel_styleSPOKES
inside_diameter2.500 INCHES NOMINAL IN
NSN5340-00-389-5157
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13483 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HUB OUTSIDE DIAMETER: 3.000 INCHES NOMINAL IN
•
HANDLE ROTATING FEATURE: NOT INCLUDED
•
HUB LENGTH: 1.000 INCHES NOMINAL IN
•
HANDLE COUNTERBALANCING WEIGHT: NOT INCLUDED
•
MOUNTING METHOD: THREAD HANDLE
•
SPOKE ANGLE IN DEG: 45.0
•
RATCHET: NOT INCLUDED
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT2.000 INCHES NOMINAL IN
HUB OUTSIDE DIAMETER3.000 INCHES NOMINAL IN
HANDLE ROTATING FEATURENOT INCLUDED
HUB LENGTH1.000 INCHES NOMINAL IN
HANDLE COUNTERBALANCING WEIGHTNOT INCLUDED
MOUNTING METHODTHREAD HANDLE
SPOKE ANGLE IN DEG45.0
RATCHETNOT INCLUDED
OUTSIDE DIAMETER6.812 INCHES NOMINAL IN
DRIVE FACILITY STYLEROUND
SUBSTITUTES & CROSS-REFERENCES 1
P14639-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 13483?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13483?
13483 is a PLATE,RETAINING,ELECTRICAL CONNE manufactured by Clementoni.
What parts can replace 13483?
There is 1 known substitute for 13483: P14639-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 13483?
13483 is cataloged in the U.S. Government catalog under NSN 5340-00-389-5157. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13483

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.