1345M58G06 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

1345M58G06: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN, material: STEEL COMP 321 OVERALL, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_thickness: 0.032 INCHES NOMINAL IN, loop_inside_diameter: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-143-0286, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

1345M58G06

NSN: 5340-00-143-0286
FSC: 5340 — Hardware, Commercial
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)

SPECIFICATIONS

diameter	0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
material	STEEL COMP 321 OVERALL
overall_width	0.500 INCHES NOMINAL IN
style_designator	SINGLE LOOP
material_thickness	0.032 INCHES NOMINAL IN
loop_inside_diameter	0.375 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end	1.432 INCHES MINIMUM AND 1.522 INCHES MAXIMUM IN
center_to_center_distance_between_first_and_second_holes	0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	1.192 INCHES MINIMUM AND 1.262 INCHES MAXIMUM IN
NSN	5340-00-143-0286

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

DIAMETER: 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.432 INCHES MINIMUM AND 1.522 INCHES MAXIMUM IN

•

CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.192 INCHES MINIMUM AND 1.262 INCHES MAXIMUM IN

•

MATERIAL: STEEL COMP 321 OVERALL

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
DIAMETER	0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.432 INCHES MINIMUM AND 1.522 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES	0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	1.192 INCHES MINIMUM AND 1.262 INCHES MAXIMUM IN
MATERIAL	STEEL COMP 321 OVERALL
LOOP INSIDE DIAMETER	0.375 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 3

9608M10P06Reference document

Same NSN cross-reference

Reference document — Secondary reference

5340PL0826009Reference document

Same NSN cross-reference

Reference document — Informative reference only

82743-6Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 1345M58G06?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1345M58G06?

1345M58G06 is a CLAMP,LOOP.

What parts can replace 1345M58G06?

There are 3 known substitutes for 1345M58G06: 9608M10P06, 5340PL0826009, 82743-6. Substitute compatibility should be verified for your specific system.

What is the NSN for 1345M58G06?

1345M58G06 is cataloged in the U.S. Government catalog under NSN 5340-00-143-0286. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1345M58G06 — CLAMP,LOOP

Request a Quote — 1345M58G06