PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13454-2
13454-2 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The BELTS,V,MATCHED SET is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, nut_style: SQUARE, nut_height: 0.125 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-013-4542, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13454-2
NSN: 5310-00-013-4542
FSC: 5310
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
nut_styleSQUARE
nut_height0.125 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
width_across_flats0.375 INCHES NOMINAL IN
nominal_thread_size0.190 INCHES IN
bearing_surface_typeFLAT
thread_quantity_per_inch20
material_document_and_classificationQQ-B-611-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-013-4542
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 13454-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 20
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
BEARING SURFACE TYPE: FLAT
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
THREAD CLASS: 2B
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-611-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: COPPER ALLOY OVERALL
•
NUT HEIGHT: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH20
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
BEARING SURFACE TYPEFLAT
NOMINAL THREAD SIZE0.190 INCHES IN
THREAD CLASS2B
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-611-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALCOPPER ALLOY OVERALL
NUT HEIGHT0.125 INCHES NOMINAL IN
NUT STYLESQUARE
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
13T461-2Interchangeable
interchangeable cross-reference
interchangeable
4-0252Interchangeable
interchangeable cross-reference
interchangeable
5136878Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13454-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13454-2?
13454-2 is a BELTS,V,MATCHED SET.
What parts can replace 13454-2?
There are 3 known substitutes for 13454-2: 13T461-2, 4-0252, 5136878. Substitute compatibility should be verified for your specific system.
What is the NSN for 13454-2?
13454-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-013-4542. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13454-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026