PartsTable
Technical Data Sheet
Download PDF

134462 — REDUCER,TUBE

✓ Government record, cited
Hama · HOSE FITTING
PRODUCT OVERVIEW

134462: REDUCER,TUBE.

The REDUCER,TUBE is a Hama industrial component. Key specifications include height: 0.062 INCHES NOMINAL IN, diameter: 0.4985 INCHES MINIMUM AND 0.4990 INCHES MAXIMUM IN, material: STEEL COMP 632 OVERALL, head_style: FLAT, surface_finish: 32.0 MICROINCHES OUTSIDE DIAMETER, undercut_width: 0.031 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-209-5016, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
134462
NSN: 4730-00-209-5016
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 6L481 — TLD AMERICA CORPORATION DIV TLD AMERICA (USA)
SPECIFICATIONS
height0.062 INCHES NOMINAL IN
diameter0.4985 INCHES MINIMUM AND 0.4990 INCHES MAXIMUM IN
materialSTEEL COMP 632 OVERALL
head_styleFLAT
surface_finish32.0 MICROINCHES OUTSIDE DIAMETER
undercut_width0.031 INCHES NOMINAL IN
first_end_styleSQUARE
hardness_rating46.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM OVERALL
special_featuresCONCENTRIC HOLE AT SQUARE END 0.594 IN. NOM DEEP,COUNTERBORED 0.094 IN. MIN,0.099 IN. MAX DEEP,0.281 IN. MIN,0.291 IN. MAX DIA AND THREADED 0.138 IN.-32 UNC-2B,0.406 IN. NOM THREAD LG IN
style_designatorGROOVE
pin_head_diameter0.625 INCHES NOMINAL IN
surface_treatmentLUBRICANT SHANK
NSN4730-00-209-5016
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 134462 · Hama ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 3
15877-4-6SReference document
Same NSN cross-reference
Reference document — Secondary reference
3240589Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
P-3507AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 134462?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 134462?
134462 is a REDUCER,TUBE manufactured by Hama.
What parts can replace 134462?
There are 3 known substitutes for 134462: 15877-4-6S, 3240589, P-3507A. Substitute compatibility should be verified for your specific system.
What is the NSN for 134462?
134462 is cataloged in the U.S. Government catalog under NSN 4730-00-209-5016. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 134462

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.