PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 134444
134444 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SHAFT,SHOULDERED is a the manufacturer industrial component. Key specifications include end_item_identification: VICKERS INC., AXIAL PISTON PUMP MODEL L1PV2200FV13. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-013-4444, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
134444
NSN: 5305-00-013-4444
FSC: 5305
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
end_item_identificationVICKERS INC., AXIAL PISTON PUMP MODEL L1PV2200FV13
NSN5305-00-013-4444
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 134444 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 20
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
THREAD LENGTH: 1.847 INCHES MINIMUM IN
•
INTERNAL DRIVE STYLE: SLOT
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC ALL MATERIAL RESPONSES
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH20
NOMINAL THREAD DIAMETER0.250 INCHES IN
THREAD LENGTH1.847 INCHES MINIMUM IN
INTERNAL DRIVE STYLESLOT
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC ALL MATERIAL RESPONSES
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SCREW SURFACE TREATMENTCADMIUM OR ZINC
THREAD CLASS2A A
HEAD DIAMETER0.477 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
101063Interchangeable
interchangeable cross-reference
interchangeable
FFS92TYPE1STYLE6SInterchangeable
interchangeable cross-reference
interchangeable
110624Interchangeable
interchangeable cross-reference
interchangeable
51727Interchangeable
interchangeable cross-reference
interchangeable
134131Interchangeable
interchangeable cross-reference
interchangeable
134159Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 134444?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 134444?
134444 is a SHAFT,SHOULDERED.
What parts can replace 134444?
There are 13 known substitutes for 134444: 101063, FFS92TYPE1STYLE6S, 110624 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 134444?
134444 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-013-4444. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 134444

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026