The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 625, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_length: 0.750 INCHES NOMINAL IN, second_leg_style: END RADIUS, special_features: CLIP,SPRING TENSION ATTACHED TO FIRST LEG. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-249-9677, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
1340M12G03
NSN:5340-01-249-9677 FSC:5340 — Hardware, Commercial CAGE:07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
material
NICKEL ALLOY 625
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
SQUARE
first_leg_length
0.750 INCHES NOMINAL IN
second_leg_style
END RADIUS
special_features
CLIP,SPRING TENSION ATTACHED TO FIRST LEG
style_designator
ANGLE
first_leg_thickness
0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
second_leg_thickness
0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
first_leg_hole_diameter
0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
second_leg_hole_diameter
0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
first_leg_hole_arrangement_style
TWO HOLES
NSN
5340-01-249-9677
COMPONENT DIAGRAM
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.340 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG STYLE: SQUARE
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.340 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER
0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG HOLE DIAMETER
0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLE
TWO HOLES
STYLE DESIGNATOR
ANGLE
FIRST LEG STYLE
SQUARE
MATERIAL DOCUMENT AND CLASSIFICATION
AMS 5599 ASSN STD SINGLE MATERIAL RESPONSE
SECOND LEG THICKNESS
0.060 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1340M12G03?
1340M12G03 is a BRACKET,ANGLE.
What is the NSN for 1340M12G03?
1340M12G03 is cataloged in the U.S. Government catalog under NSN 5340-01-249-9677. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.