PartsTable
Technical Data Sheet
Download PDF

134055 — SEAT,BALL SOCKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

134055: SEAT,BALL SOCKET.

The SEAT,BALL SOCKET is a the manufacturer industrial component. Key specifications include radius: 0.500 INCHES NOMINAL IN, material: STEEL, hole_diameter: 0.125 INCHES NOMINAL IN, overall_height: 0.360 INCHES NOMINAL IN, ball_seat_depth: 0.129 INCHES NOMINAL IN, outside_diameter: 1.026 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-930-6386, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
134055
NSN: 5340-00-930-6386
NIINs: 009306386, 013005096
FSC: 5340 — Hardware, Commercial
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
radius0.500 INCHES NOMINAL IN
materialSTEEL
hole_diameter0.125 INCHES NOMINAL IN
overall_height0.360 INCHES NOMINAL IN
ball_seat_depth0.129 INCHES NOMINAL IN
outside_diameter1.026 INCHES NOMINAL IN
style_designatorSEAT
NSN5340-00-930-6386
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 134055 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RADIUS: 0.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SEAT
•
OUTSIDE DIAMETER: 1.026 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
BALL SEAT DEPTH: 0.129 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.360 INCHES NOMINAL IN
RADIUS0.500 INCHES NOMINAL IN
STYLE DESIGNATORSEAT
OUTSIDE DIAMETER1.026 INCHES NOMINAL IN
MATERIALSTEEL
BALL SEAT DEPTH0.129 INCHES NOMINAL IN
HOLE DIAMETER0.125 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
26-015Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 134055?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 134055?
134055 is a SEAT,BALL SOCKET.
What parts can replace 134055?
There is 1 known substitute for 134055: 26-015. Substitute compatibility should be verified for your specific system.
What is the NSN for 134055?
134055 is cataloged in the U.S. Government catalog under NSN 5340-00-930-6386. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 134055