PartsTable
Technical Data Sheet
Download PDF

134014-1 — HOUSING,COUNTER MEASUREMENT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

134014-1: HOUSING,COUNTER MEASUREMENT.

The HOUSING,COUNTER MEASUREMENT is a the manufacturer industrial component. Key specifications include length: 0.340 INCHES MAXIMUM IN, diameter: 0.250 INCHES NOMINAL IN, style_designator: PROJECTION BOTH ENDS, cross-sectional_shape: ROUND, end_item_identification: THREAT EMITTE, distance_from_end_to_hole_center: 0.220 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-150-2754, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 134014-1
NSN: 5340-00-150-2754
NIINs: 001502754, 016024731
FSC: 5340 — Hardware, Commercial
CAGE: 05257 — GENERAL DYNAMICS LAND SYSTEMS - CANADACORPORATION DIV GENERAL DYNAMICS MISSION SYSTEMS (CAN)
SPECIFICATIONS
length0.340 INCHES MAXIMUM IN
diameter0.250 INCHES NOMINAL IN
style_designatorPROJECTION BOTH ENDS
cross-sectional_shapeROUND
end_item_identificationTHREAT EMITTE
distance_from_end_to_hole_center0.220 INCHES NOMINAL IN
hole_quantity_perpendicular_to_axis1
NSN5340-00-150-2754
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 134014-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.340 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: PROJECTION BOTH ENDS
•
DIAMETER: 0.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE: ROUND
•
DISTANCE FROM END TO HOLE CENTER: 0.220 INCHES NOMINAL IN
•
HOLE QUANTITY PERPENDICULAR TO AXIS: 1
TECHNICAL CHARACTERISTICS
LENGTH0.340 INCHES MAXIMUM IN
STYLE DESIGNATORPROJECTION BOTH ENDS
DIAMETER0.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEROUND
DISTANCE FROM END TO HOLE CENTER0.220 INCHES NOMINAL IN
HOLE QUANTITY PERPENDICULAR TO AXIS1
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 134014-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 134014-1?
134014-1 is a HOUSING,COUNTER MEASUREMENT. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 134014-1?
134014-1 is cataloged in the U.S. Government catalog under NSN 5340-00-150-2754. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 134014-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.