PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13385946
13385946 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BAND,RETAINING is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL IN, length: 23.000 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING, end_style: SPLIT LOOP WITH PLAIN BUSHING, thickness: 0.040 INCHES NOMINAL IN, loop_radius: 0.310 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-797-7261, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13385946
NSN: 5340-00-797-7261
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
width1.000 INCHES NOMINAL IN
length23.000 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING
end_styleSPLIT LOOP WITH PLAIN BUSHING
thickness0.040 INCHES NOMINAL IN
loop_radius0.310 INCHES NOMINAL IN
thread_size0.250-28 UNF-2A A
hole_diameter0.250 INCHES NOMINAL IN
special_featuresSYNTHETIC RUBBER CUSHIONING
basic_shape_styleFLAT
end_item_identificationW/S: GUIDED MISSILE, INTERCEPT
material_document_and_classificationMIL-S-5059, 1/4 HARD MIL SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-797-7261
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13385946 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SIZE: 0.250-28 UNF-2A A
•
BASIC SHAPE STYLE: FLAT
•
LOOP RADIUS: 0.310 INCHES NOMINAL IN
•
THICKNESS: 0.040 INCHES NOMINAL IN
•
LENGTH: 23.000 INCHES NOMINAL IN
•
END STYLE: SOLID LOOP
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SIZE0.250-28 UNF-2A A
SPECIAL FEATURESSYNTHETIC RUBBER CUSHIONING
BASIC SHAPE STYLEFLAT
LOOP RADIUS0.310 INCHES NOMINAL IN
END ITEM IDENTIFICATIONW/S: GUIDED MISSILE, INTERCEPT
THICKNESS0.040 INCHES NOMINAL IN
LENGTH23.000 INCHES NOMINAL IN
END STYLESOLID LOOP
MATERIALSTEEL CORROSION RESISTING
END STYLELOOP WITH BOLT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
717-004865Interchangeable
interchangeable cross-reference
interchangeable
708Interchangeable
interchangeable cross-reference
interchangeable
1321-0708Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-22052Interchangeable
interchangeable cross-reference
interchangeable
MIL-V-22052DInterchangeable
interchangeable cross-reference
interchangeable
8347-2 1/2 IN.Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13385946?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13385946?
13385946 is a BAND,RETAINING.
What parts can replace 13385946?
There are 14 known substitutes for 13385946: 717-004865, 708, 1321-0708 and 11 more. Substitute compatibility should be verified for your specific system.
Is 13385946 still available?
13385946 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13385946

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026