Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW
The Equip® USB-C to DisplayPort adapter cable offers a convenient solution for directly connecting your USB-C™ device to your DisplayPort monitor or projector, Quality and stable transmission, gold-plated joints do not rust, say goodbye to water ripple stable transmission. <br> This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-013-3421, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
133421
NSN:5305-00-013-3421 FSC:5305 CAGE:24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
head_style
FLAT COUNTERSUNK
thread_class
2A A
head_diameter
0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
thread_length
0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
screw_material
STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
fastener_length
0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_direction
RIGHT-HAND
countersink_angle
80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_style
CROSS RECESS TYPE 1
nominal_thread_diameter
0.138 INCHES IN
screw_surface_treatment
PHOSPHATE
thread_quantity_per_inch
32
NSN
5305-00-013-3421
COMPONENT DIAGRAM
KEY FEATURES
•
THREAD CLASS: 2A A
•
THREAD LENGTH: 0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES
•
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
HEAD DIAMETER: 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS
2A A
THREAD LENGTH
0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
INTERNAL DRIVE STYLE
CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER
0.138 INCHES IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION
SAE ASSN STD ALL MATERIAL RESPONSES
FASTENER LENGTH
0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
THREAD SERIES DESIGNATOR
UNIFIED NATIONAL COARSE (UNC)
HEAD DIAMETER
0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
SCREW MATERIAL
STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 133421?
133421 is a CAPACITOR,FIXED,ELECTROLYTIC manufactured by Equip.
What parts can replace 133421?
There are 16 known substitutes for 133421: SP32163, 419542-2, GB2717-2 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 133421?
133421 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-013-3421. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.