PartsTable
Technical Data Sheet
Download PDF

133414 — O-RING

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

133414: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 1.250 INCHES NOMINAL IN, cross-sectional_height: 0.125 INCHES NOMINAL IN, end_item_identification: 2350010818138; ASSAULT VEHICLE, FULL TRACKED, AMPHIBIOUS. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-013-3414, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
133414
NSN: 5305-00-013-3414
NIINs: 000133414, 014702934
FSC: 5305 — Screws
CAGE: 12204 — CHRYSLER REALTY COMPANY LLC DBA DAIMLER CHRYSLER (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating70.0 SHORE DUROMETER A NOMINAL
center_hole_diameter1.250 INCHES NOMINAL IN
cross-sectional_height0.125 INCHES NOMINAL IN
end_item_identification2350010818138; ASSAULT VEHICLE, FULL TRACKED, AMPHIBIOUS
NSN5305-00-013-3414
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 133414 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM AND DICHROMATE OR ZINC AND DICHROMATE
•
FASTENER LENGTH: 0.250 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 EXCEPT BESSEMER COMP FED SPEC 1ST MATERIAL RESPONSE OR QQ-W-409 FED SPEC 2ND MATERIAL RESPONSE OR QQ-W-409 FED SPEC 3RD MATERIAL RESPONSE OR QQ-W-409 FED SPEC 4TH MATERIAL RESPONSE OR QQ-W-409 FED SPEC 5TH MATERIAL RESPONSE OR QQ-W-409,GRADE 3 FED SPEC 6TH MATERIAL RESPONSE OR QQ-W-409 FED SPEC 7TH MATERIAL RESPONSE OR QQ-W-409 FED SPEC 8TH MATERIAL RESPONSE OR QQ-W-409 FED SPEC 9TH MATERIAL RESPONSE OR QQ-W-409 FED SPEC 10TH MATERIAL RESPONSE OR QQ-W-409 FED SPEC 11TH MATERIAL RESPONSE OR QQ-W-409 FED SPEC 12TH MATERIAL RESPONSE OR QQ-W-409 FED SPEC 13TH MATERIAL RESPONSE OR QQ-W-409 FED SPEC 14TH MATERIAL RESPONSE
•
THREAD LENGTH: 0.167 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
NONDEFINITIVE SPEC/STD DATA: I TYPE AND 2S STYLE
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM AND DICHROMATE OR ZINC AND DICHROMATE
FASTENER LENGTH0.250 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 EXCEPT BESSEMER COMP FED SPEC 1ST MATERIAL RESPONSE OR QQ-W-409 FED SPEC 2ND MATERIAL RESPONSE OR QQ-W-409 FED SPEC 3RD MATERIAL RESPONSE OR QQ-W-409 FED SPEC 4TH MATERIAL RESPONSE OR QQ-W-409 FED SPEC 5TH MATERIAL RESPONSE OR QQ-W-409,GRADE 3 FED SPEC 6TH MATERIAL RESPONSE OR QQ-W-409 FED SPEC 7TH MATERIAL RESPONSE OR QQ-W-409 FED SPEC 8TH MATERIAL RESPONSE OR QQ-W-409 FED SPEC 9TH MATERIAL RESPONSE OR QQ-W-409 FED SPEC 10TH MATERIAL RESPONSE OR QQ-W-409 FED SPEC 11TH MATERIAL RESPONSE OR QQ-W-409 FED SPEC 12TH MATERIAL RESPONSE OR QQ-W-409 FED SPEC 13TH MATERIAL RESPONSE OR QQ-W-409 FED SPEC 14TH MATERIAL RESPONSE
THREAD LENGTH0.167 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATAI TYPE AND 2S STYLE
INTERNAL DRIVE STYLESLOT
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
SUBSTITUTES & CROSS-REFERENCES 3
P111374Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS35241-33Reference document
Same NSN cross-reference
Reference document — Secondary reference
BCKX1EC1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 133414?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 133414?
133414 is a O-RING.
What parts can replace 133414?
There are 3 known substitutes for 133414: P111374, MS35241-33, BCKX1EC1. Substitute compatibility should be verified for your specific system.
What is the NSN for 133414?
133414 is cataloged in the U.S. Government catalog under NSN 5305-00-013-3414. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 133414

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.