PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 133288
133288 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.139 INCHES MINIMUM AND 0.153 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.382 INCHES MINIMUM AND 0.408 INCHES MAXIMUM IN, thread_length: 0.355 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN, screw_material: COPPER ALLOY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3907, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
133288
NSN: 5315-00-010-3907
FSC: 5315
CAGE: 08683 — BROCKWAY MOTOR TRUCKS DIV OF MACK TRUCKS INC (USA)
SPECIFICATIONS
head_styleROUND
head_height0.139 INCHES MINIMUM AND 0.153 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.382 INCHES MINIMUM AND 0.408 INCHES MAXIMUM IN
thread_length0.355 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
screw_materialCOPPER ALLOY
fastener_length0.438 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.216 INCHES IN
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch24
NSN5315-00-010-3907
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 133288 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
C5315X14Interchangeable
interchangeable cross-reference
interchangeable
A5811Interchangeable
interchangeable cross-reference
interchangeable
637425Interchangeable
interchangeable cross-reference
interchangeable
203562-1Interchangeable
interchangeable cross-reference
interchangeable
219Interchangeable
interchangeable cross-reference
interchangeable
3219Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 133288?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 133288?
133288 is a SCREW,MACHINE.
What parts can replace 133288?
There are 26 known substitutes for 133288: C5315X14, A5811, 637425 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 133288?
133288 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3907. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 133288

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026