PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 133179
133179 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The PIN,CRANE is a the manufacturer industrial component. Key specifications include end_item_identification: WHITING CRANE 9454. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-151-1081, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
133179
NSN: 5306-00-151-1081
FSC: 5306
CAGE: 06848 — HONEYWELL INTERNATIONAL INC DIV AEROSPACE-SOUTH BEND (BENDIX DR) (USA)
SPECIFICATIONS
end_item_identificationWHITING CRANE 9454
NSN5306-00-151-1081
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 133179 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE QUANTITY: 6
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD QUANTITY PER INCH: 28
•
HOLE DIAMETER: 0.070 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
WIDTH BETWEEN FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
HOLE CONFIGURATION STYLE: HEXAGON FLATS
TECHNICAL CHARACTERISTICS (FLIS)
HOLE QUANTITY6
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH28
HOLE DIAMETER0.070 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
WIDTH BETWEEN FLATS0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
HOLE CONFIGURATION STYLEHEXAGON FLATS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
THREAD LENGTH0.501 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
AN7-47Interchangeable
interchangeable cross-reference
interchangeable
23-3-0-7Interchangeable
interchangeable cross-reference
interchangeable
4489Interchangeable
interchangeable cross-reference
interchangeable
133179Interchangeable
interchangeable cross-reference
interchangeable
6631089-9Interchangeable
interchangeable cross-reference
interchangeable
6026-4001-4Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 133179?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 133179?
133179 is a PIN,CRANE.
What parts can replace 133179?
There are 6 known substitutes for 133179: AN7-47, 23-3-0-7, 4489 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 133179?
133179 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-151-1081. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 133179

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026