PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13303SA
13303SA ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 8.00 MILLIMETERS NOMINAL MM, overall_width: 7.0 MILLIMETERS NOMINAL MM, alignment_type: SELF-ALIGNING, load_direction: ANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-6085, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13303SA
NSN: 3110-00-554-6085
FSC: 3110
CAGE: 21760 — SCHATZ BEARING CORPORATION DBA SCHATZ BEARING CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter8.00 MILLIMETERS NOMINAL MM
overall_width7.0 MILLIMETERS NOMINAL MM
alignment_typeSELF-ALIGNING
load_directionANGULAR
surface_finishGROUND
style_designatorNON-SEPARABLE
self-alignment_locationINTERNAL
overall_outside_diameter22.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
NSN3110-00-554-6085
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 13303SA · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
LOAD DIRECTION: ANGULAR
•
BORE DIAMETER: 8.00 MILLIMETERS NOMINAL MM
•
OVERALL OUTSIDE DIAMETER: 22.00 MILLIMETERS NOMINAL MM
•
STYLE DESIGNATOR: NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
LOAD DIRECTIONANGULAR
BORE DIAMETER8.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER22.00 MILLIMETERS NOMINAL MM
STYLE DESIGNATORNON-SEPARABLE
MATERIALSTEEL OVERALL
INTERNAL FIT-UP DESIGNATIONSTANDARD
OVERALL WIDTH7.0 MILLIMETERS NOMINAL MM
SELF-ALIGNMENT LOCATIONINTERNAL
ALIGNMENT TYPESELF-ALIGNING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
133033Interchangeable
interchangeable cross-reference
interchangeable
FFS92TYPE1STYLE1SInterchangeable
interchangeable cross-reference
interchangeable
13303Interchangeable
interchangeable cross-reference
interchangeable
1340Interchangeable
interchangeable cross-reference
interchangeable
24070Interchangeable
interchangeable cross-reference
interchangeable
18003Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13303SA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13303SA?
13303SA is a BEARING,BALL,ANNULAR.
What parts can replace 13303SA?
There are 24 known substitutes for 13303SA: 133033, FFS92TYPE1STYLE1S, 13303 and 21 more. Substitute compatibility should be verified for your specific system.
Is 13303SA still available?
13303SA is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13303SA

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026