PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13300J
13300J ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 5.00 MILLIMETERS NOMINAL MM, overall_width: 6.0 MILLIMETERS NOMINAL MM, alignment_type: SELF-ALIGNING, load_direction: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-5725, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13300J
NSN: 3110-00-554-5725
FSC: 3110
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter5.00 MILLIMETERS NOMINAL MM
overall_width6.0 MILLIMETERS NOMINAL MM
alignment_typeSELF-ALIGNING
load_directionANGULAR
surface_finishGROUND
style_designatorNON-SEPARABLE
self-alignment_locationINTERNAL
overall_outside_diameter19.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
NSN3110-00-554-5725
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 13300J · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
STYLE DESIGNATOR: NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
OVERALL OUTSIDE DIAMETER: 19.00 MILLIMETERS NOMINAL MM
•
SELF-ALIGNMENT LOCATION: INTERNAL
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
BORE DIAMETER: 5.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONABEC NO.1
STYLE DESIGNATORNON-SEPARABLE
MATERIALSTEEL OVERALL
OVERALL OUTSIDE DIAMETER19.00 MILLIMETERS NOMINAL MM
SELF-ALIGNMENT LOCATIONINTERNAL
RETAINER FABRICATION METHODPRESSED
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE DIAMETER5.00 MILLIMETERS NOMINAL MM
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONINWARD CONVERGENT
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
18033-1Interchangeable
interchangeable cross-reference
interchangeable
7588Interchangeable
interchangeable cross-reference
interchangeable
13300Interchangeable
interchangeable cross-reference
interchangeable
AS4857Interchangeable
interchangeable cross-reference
interchangeable
4730PL1424186Interchangeable
interchangeable cross-reference
interchangeable
4171302-82Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13300J?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13300J?
13300J is a BEARING,BALL,ANNULAR.
What parts can replace 13300J?
There are 16 known substitutes for 13300J: 18033-1, 7588, 13300 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13300J?
13300J is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-5725. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13300J

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026