PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 133-190
133-190 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The DEVELOPER,PHOTOGRAPHIC is a the manufacturer industrial component. Key specifications include physical_form: LIQUID, special_features: TWO 5 QUART BOTTLES PER BOX, unit_package_content_form: SINGLE UNIT FOR MIXING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-938-2893, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
133-190
NSN: 5330-00-938-2893
FSC: 5330
CAGE: 15434 — CUMMINS INC. (USA)
SPECIFICATIONS
physical_formLIQUID
special_featuresTWO 5 QUART BOTTLES PER BOX
unit_package_content_formSINGLE UNIT FOR MIXING
NSN5330-00-938-2893
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 133-190 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.027 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
BOLT HOLE QUANTITY: 6
•
BOLT CIRCLE DIAMETER: 7.630 INCHES NOMINAL IN
•
PERIPHERAL FLAT QUANTITY: 6
•
OUTSIDE CORNER RADIUS: 0.400 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.027 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
OVERALL LENGTH8.030 INCHES NOMINAL IN
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
BOLT HOLE QUANTITY6
BOLT CIRCLE DIAMETER7.630 INCHES NOMINAL IN
OVERALL WIDTH7.630 INCHES NOMINAL IN
PERIPHERAL FLAT QUANTITY6
OUTSIDE CORNER RADIUS0.400 INCHES NOMINAL IN
APERTURE DIAMETER6.295 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
CONSET RCInterchangeable
interchangeable cross-reference
interchangeable
11 6017Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 133-190?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 133-190?
133-190 is a DEVELOPER,PHOTOGRAPHIC.
What parts can replace 133-190?
There are 2 known substitutes for 133-190: CONSET RC, 11 6017. Substitute compatibility should be verified for your specific system.
What is the NSN for 133-190?
133-190 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-938-2893. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 133-190

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026