PartsTable
Technical Data Sheet
Download PDF

132D1961-3 — GEAR,SPUR

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

132D1961-3: GEAR,SPUR.

The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, body_style: WEBBED, SOLID, bore_style: PLAIN BOTH ENDS, pitch_diameter: 2.7826 INCHES NOMINAL IN, pressure_angle: 20.0000 DEGREES, teeth_quantity: 32. This part is cataloged in the U.S.

Government catalog under NSN 3020-01-254-2736, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
132D1961-3
NSN: 3020-01-254-2736
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 05606 — GENERAL DYNAMICS-OTS, INC. DIV ORDNANCE AND TACTICAL SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleWEBBED, SOLID
bore_stylePLAIN BOTH ENDS
pitch_diameter2.7826 INCHES NOMINAL IN
pressure_angle20.0000 DEGREES
teeth_quantity32
style_designatorPROTRUDING HUBS
face_nominal_width0.750 INCHES IN
hub_nominal_diameter0.940 INCHES BOTH ENDS IN
hub_style_designatorPLAIN BOTH ENDS
bore_nominal_diameter0.688 INCHES BOTH ENDS IN
nominal_outside_diameter2.894 INCHES IN
NSN3020-01-254-2736
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available GEAR,SPUR TITLE COMPONENT PN 132D1961-3 MFR GEAR,SPUR
KEY FEATURES
•
BORE NOMINAL DIAMETER: 0.688 INCHES BOTH ENDS IN
•
HUB NOMINAL DIAMETER: 0.940 INCHES BOTH ENDS IN
•
TEETH QUANTITY: 32
•
BODY STYLE: WEBBED, SOLID
•
BORE STYLE: PLAIN BOTH ENDS
•
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.070 INCHES BOTH ENDS IN
•
STYLE DESIGNATOR: PROTRUDING HUBS
•
PITCH DIAMETER: 2.7826 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
BORE NOMINAL DIAMETER0.688 INCHES BOTH ENDS IN
HUB NOMINAL DIAMETER0.940 INCHES BOTH ENDS IN
TEETH QUANTITY32
BODY STYLEWEBBED, SOLID
BORE STYLEPLAIN BOTH ENDS
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.070 INCHES BOTH ENDS IN
STYLE DESIGNATORPROTRUDING HUBS
PITCH DIAMETER2.7826 INCHES NOMINAL IN
HUB STYLE DESIGNATORPLAIN BOTH ENDS
NOMINAL OUTSIDE DIAMETER2.894 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 1
132D1961Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)
Ready to buy 132D1961-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 132D1961-3?
132D1961-3 is a GEAR,SPUR.
What parts can replace 132D1961-3?
There is 1 known substitute for 132D1961-3: 132D1961. Substitute compatibility should be verified for your specific system.
What is the NSN for 132D1961-3?
132D1961-3 is cataloged in the U.S. Government catalog under NSN 3020-01-254-2736. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 132D1961-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.