PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 132926
132926 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include width: 4.500 INCHES NOMINAL IN, length: 17.000 INCHES NOMINAL IN, corner_cut_type: ROUND, special_features: LOW SPEED, precious_material: SILVER, precious_material_and_weight: 0.040 SILVER GRAINS, TROY. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-285-4553, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
132926
NSN: 5305-00-285-4553
FSC: 5305
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
width4.500 INCHES NOMINAL IN
length17.000 INCHES NOMINAL IN
corner_cut_typeROUND
special_featuresLOW SPEED
precious_materialSILVER
precious_material_and_weight0.040 SILVER GRAINS, TROY
paper_interleaving_applicationALTERNATIVE INTERLEAVED
precious_material_and_locationEMULSION SILVER
NSN5305-00-285-4553
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 132926 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.250 INCHES NOMINAL IN
•
SCREW MATERIAL: STEEL
•
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
•
THREAD QUANTITY PER INCH: 32
•
THREAD SERIES DESIGNATOR: UNF
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1S STYLE
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH1.250 INCHES NOMINAL IN
SCREW MATERIALSTEEL
HEAD HEIGHT0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
HEAD DIAMETER0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
THREAD CLASS2A A
THREAD QUANTITY PER INCH32
THREAD SERIES DESIGNATORUNF
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1S STYLE
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD DIAMETER0.190 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
MIL-S-933TYPEBInterchangeable
interchangeable cross-reference
interchangeable
3-4APC7Interchangeable
interchangeable cross-reference
interchangeable
3-4WPC7Interchangeable
interchangeable cross-reference
interchangeable
118-32ALT2PC4Interchangeable
interchangeable cross-reference
interchangeable
20289Interchangeable
interchangeable cross-reference
interchangeable
132926Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 132926?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 132926?
132926 is a SCREW,MACHINE.
What parts can replace 132926?
There are 10 known substitutes for 132926: MIL-S-933TYPEB, 3-4APC7, 3-4WPC7 and 7 more. Substitute compatibility should be verified for your specific system.
Is 132926 still available?
132926 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 132926

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026