PartsTable
Technical Data Sheet
Download PDF

1325730 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1325730: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include end_radius: 0.250 INCHES NOMINAL IN, fork_depth: 1.300 INCHES NOMINAL IN, thread_class: 2B ROD CONNECTION, hole_diameter: 0.250 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN, overall_width: 0.630 INCHES NOMINAL IN, thread_length: 0.700 INCHES NOMINAL ROD CONNECTION IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-171-3765, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1325730
NSN: 5340-01-171-3765
FSC: 5340 — Hardware, Commercial
CAGE: 45152 — OSHKOSH CORP (USA)
SPECIFICATIONS
end_radius0.250 INCHES NOMINAL IN
fork_depth1.300 INCHES NOMINAL IN
thread_class2B ROD CONNECTION
hole_diameter0.250 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
overall_width0.630 INCHES NOMINAL IN
thread_length0.700 INCHES NOMINAL ROD CONNECTION IN
shank_diameter0.440 INCHES NOMINAL IN
fork_span_width0.290 INCHES NOMINAL IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
fork_arm_thickness0.170 INCHES NOMINAL IN
end_item_identification2320-01-304-2277 AND 2320-01-304-2278 PLS (PALLETIZED LOADING SYSTEM)
NSN5340-01-171-3765
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1325730 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.440 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.290 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.170 INCHES NOMINAL IN
•
END RADIUS: 0.250 INCHES NOMINAL IN
•
THREAD LENGTH: 0.700 INCHES NOMINAL ROD CONNECTION IN
•
STYLE DESIGNATOR: CLEVIS
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.440 INCHES NOMINAL IN
FORK SPAN WIDTH0.290 INCHES NOMINAL IN
FORK ARM THICKNESS0.170 INCHES NOMINAL IN
END RADIUS0.250 INCHES NOMINAL IN
THREAD LENGTH0.700 INCHES NOMINAL ROD CONNECTION IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH0.630 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
THREAD CLASS2B ROD CONNECTION
END ITEM IDENTIFICATION2320-01-304-2277 AND 2320-01-304-2278 PLS (PALLETIZED LOADING SYSTEM)
SUBSTITUTES & CROSS-REFERENCES 1
AC208Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1325730?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1325730?
1325730 is a CLEVIS,ROD END.
What parts can replace 1325730?
There is 1 known substitute for 1325730: AC208. Substitute compatibility should be verified for your specific system.
What is the NSN for 1325730?
1325730 is cataloged in the U.S. Government catalog under NSN 5340-01-171-3765. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1325730

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.