PartsTable
Technical Data Sheet
Download PDF

132535 — RETAINER,HELICAL COMPRESSION SPR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

132535: RETAINER,HELICAL COMPRESSION SPR.

RETAINER,HELICAL COMPRESSION SPR. Key specifications include material: STEEL, lip_thickness: 0.095 INCHES NOMINAL IN, overall_height: 0.740 INCHES NOMINAL IN, flange_diameter: 1.070 INCHES NOMINAL IN, flange_thickness: 0.125 INCHES NOMINAL IN, style_designator: PARALLEL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-395-4612, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
132535
NSN: 5340-00-395-4612
FSC: 5340 — Hardware, Commercial
CAGE: H0001 — DAF TRUCKS N.V. (NLD)
SPECIFICATIONS
materialSTEEL
lip_thickness0.095 INCHES NOMINAL IN
overall_height0.740 INCHES NOMINAL IN
flange_diameter1.070 INCHES NOMINAL IN
flange_thickness0.125 INCHES NOMINAL IN
style_designatorPARALLEL
end_hole_diameter0.391 INCHES NOMINAL IN
body_inside_diameter0.518 INCHES NOMINAL IN
body_outside_diameter0.656 INCHES NOMINAL IN
casehardening_indicatorCASEHARDENED
NSN5340-00-395-4612
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 132535 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 1.070 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.125 INCHES NOMINAL IN
•
BODY OUTSIDE DIAMETER: 0.656 INCHES NOMINAL IN
•
STYLE DESIGNATOR: PARALLEL
•
BODY INSIDE DIAMETER: 0.518 INCHES NOMINAL IN
•
CASEHARDENING INDICATOR: CASEHARDENED
•
LIP THICKNESS: 0.095 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER1.070 INCHES NOMINAL IN
OVERALL HEIGHT0.740 INCHES NOMINAL IN
FLANGE THICKNESS0.125 INCHES NOMINAL IN
BODY OUTSIDE DIAMETER0.656 INCHES NOMINAL IN
STYLE DESIGNATORPARALLEL
BODY INSIDE DIAMETER0.518 INCHES NOMINAL IN
CASEHARDENING INDICATORCASEHARDENED
LIP THICKNESS0.095 INCHES NOMINAL IN
MATERIALSTEEL
END HOLE DIAMETER0.391 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
R5749Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
43074AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 132535?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 132535?
132535 is a RETAINER,HELICAL COMPRESSION SPR.
What parts can replace 132535?
There are 2 known substitutes for 132535: R5749, 43074A. Substitute compatibility should be verified for your specific system.
What is the NSN for 132535?
132535 is cataloged in the U.S. Government catalog under NSN 5340-00-395-4612. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 132535