PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13248P
13248P ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, attachment_method: ROUND HOLE, rim_surface_width: 0.562 INCHES NOMINAL IN, center_hole_diameter: 1.656 INCHES NOMINAL IN, cross-sectional_height: 1.062 INCHES NOMINAL IN, attachment_hole_diameter: 0.562 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-218-3568, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13248P
NSN: 5330-00-218-3568
FSC: 5330
CAGE: 0UBG9 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DIV EPD (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
attachment_methodROUND HOLE
rim_surface_width0.562 INCHES NOMINAL IN
center_hole_diameter1.656 INCHES NOMINAL IN
cross-sectional_height1.062 INCHES NOMINAL IN
attachment_hole_diameter0.562 INCHES NOMINAL IN
cross-sectional_thickness0.375 INCHES NOMINAL IN
attachment_feature_quantity2
NSN5330-00-218-3568
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13248P MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 1.656 INCHES NOMINAL IN
•
ATTACHMENT METHOD: ROUND HOLE
•
ATTACHMENT FEATURE QUANTITY: 2
•
ATTACHMENT HOLE DIAMETER: 0.562 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.375 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 1.062 INCHES NOMINAL IN
•
RIM SURFACE WIDTH: 0.562 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.656 INCHES NOMINAL IN
ATTACHMENT METHODROUND HOLE
ATTACHMENT FEATURE QUANTITY2
ATTACHMENT HOLE DIAMETER0.562 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.375 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT1.062 INCHES NOMINAL IN
RIM SURFACE WIDTH0.562 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
9698Interchangeable
interchangeable cross-reference
interchangeable
10185Interchangeable
interchangeable cross-reference
interchangeable
FF-S-111Interchangeable
interchangeable cross-reference
interchangeable
500974Interchangeable
interchangeable cross-reference
interchangeable
1855574Interchangeable
interchangeable cross-reference
interchangeable
10-303Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13248P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13248P?
13248P is a RETAINER,PACKING.
What parts can replace 13248P?
There are 16 known substitutes for 13248P: 9698, 10185, FF-S-111 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13248P?
13248P is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-218-3568. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13248P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026