PartsTable
Technical Data Sheet
Download PDF

132480 — SENSOR ASSEMBLY,COUNTERMEASURES

✓ Government record, cited
Hama · MRO · MRO_GENERAL
PRODUCT OVERVIEW

132480: SENSOR ASSEMBLY,COUNTERMEASURES.

SENSOR ASSEMBLY,COUNTERMEASURES. Key specifications include material: STEEL OVERALL, cone_width: 0.9550 INCHES NOMINAL IN, bore_diameter: 1.1250 INCHES NOMINAL IN, style_designator: STEEP ANGLE, cone_corner_radius: 0.1875 INCHES NOMINAL IN, end_item_identification: PREPROVISIONING SUPPORT NAVICP IS POE. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-3590, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 132480
NSN: 3110-00-100-3590
NIINs: 001003590, 014322382
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 29510 — KOMATSU AMERICAN INTL CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width0.9550 INCHES NOMINAL IN
bore_diameter1.1250 INCHES NOMINAL IN
style_designatorSTEEP ANGLE
cone_corner_radius0.1875 INCHES NOMINAL IN
end_item_identificationPREPROVISIONING SUPPORT NAVICP IS POE
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-3590
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 132480 · Hama ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: STEEP ANGLE
•
CONE CORNER RADIUS: 0.1875 INCHES NOMINAL IN
•
CONE WIDTH: 0.9550 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.1250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSTEEP ANGLE
CONE CORNER RADIUS0.1875 INCHES NOMINAL IN
CONE WIDTH0.9550 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.1250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 9
144506Reference document
Same NSN cross-reference
Reference document — Secondary reference
A218259Reference document
Same NSN cross-reference
Reference document — Secondary reference
4ZDK0138Reference document
Same NSN cross-reference
Reference document — Secondary reference
568463Reference document
Same NSN cross-reference
Reference document — Secondary reference
92666Reference document
Same NSN cross-reference
Reference document — Secondary reference
41125Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 132480?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 132480?
132480 is a SENSOR ASSEMBLY,COUNTERMEASURES manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 132480?
There are 9 known substitutes for 132480: 144506, A218259, 4ZDK0138 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 132480?
132480 is cataloged in the U.S. Government catalog under NSN 3110-00-100-3590. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 132480