PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13238296
13238296 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SLIDE SECTION,DRAWER,EXTENSION is a the manufacturer industrial component. Key specifications include width: 1.910 INCHES NOMINAL IN, section_length: 2.810 INCHES NOMINAL2.810 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S), surface_treatment: ANODIZE OVERALL, side_for_which_designed: LEFT HAND OR RIGHT HAND, surface_treatment_document_and_classification: MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-272-9285, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13238296
NSN: 5340-01-272-9285
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
width1.910 INCHES NOMINAL IN
section_length2.810 INCHES NOMINAL2.810 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentANODIZE OVERALL
side_for_which_designedLEFT HAND OR RIGHT HAND
surface_treatment_document_and_classificationMIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-272-9285
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13238296 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECTION LENGTH: 2.810 INCHES NOMINAL2.810 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: ANODIZE OVERALL
•
WIDTH: 1.910 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
SIDE FOR WHICH DESIGNED: LEFT HAND OR RIGHT HAND
TECHNICAL CHARACTERISTICS (FLIS)
SECTION LENGTH2.810 INCHES NOMINAL2.810 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTANODIZE OVERALL
WIDTH1.910 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
SIDE FOR WHICH DESIGNEDLEFT HAND OR RIGHT HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
32129Interchangeable
interchangeable cross-reference
interchangeable
TLB1E221MAAInterchangeable
interchangeable cross-reference
interchangeable
3073FE221T016JPAInterchangeable
interchangeable cross-reference
interchangeable
208681Interchangeable
interchangeable cross-reference
interchangeable
A2F40277-06Interchangeable
interchangeable cross-reference
interchangeable
PTC1150408Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13238296?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13238296?
13238296 is a SLIDE SECTION,DRAWER,EXTENSION.
What parts can replace 13238296?
There are 6 known substitutes for 13238296: 32129, TLB1E221MAA, 3073FE221T016JPA and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13238296?
13238296 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-272-9285. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13238296

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026