13229E1342-3: INSULATION SLEEVING,ELECTRICAL,S.
INSULATION SLEEVING,ELECTRICAL,S. Key specifications include height: 2.600 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN, material: PLASTIC POLYOLEFIN LOCATION NOT OTHERWISE SPECIFIED, flexibility: SEMIRIGID, temp_rating: -55.0 CELSIUS AND 135.0 CELSIUS DEGC, special_features: ADHESIVE COATING INSIDE, style_designator: BOOT-90 DEGREES. This part is cataloged in the U.S.
Government catalog under NSN 5970-01-348-4762, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| height | 2.600 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| material | PLASTIC POLYOLEFIN LOCATION NOT OTHERWISE SPECIFIED |
| flexibility | SEMIRIGID |
| temp_rating | -55.0 CELSIUS AND 135.0 CELSIUS DEGC |
| special_features | ADHESIVE COATING INSIDE |
| style_designator | BOOT-90 DEGREES |
| reliability_indicator | NOT ESTABLISHED |
| environmental_protection | FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT |
| minimum_tensile_strength | 2000 POUNDS PER SQUARE INCH LBS |
| main_body_large_end_inside_diameter | 1.740 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| main_body_small_end_inside_diameter | 2.660 INCHES MINIMUM AS SUPPLIED IN |
| material_document_and_classification | RT-301, RAYCHEM CORP MFR REF SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED |
| NSN | 5970-01-348-4762 |
| MAIN BODY SMALL END INSIDE DIAMETER | 0.800 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| MAIN BODY SMALL END INSIDE DIAMETER | 2.660 INCHES MINIMUM AS SUPPLIED IN |
| ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | 90.0 NOMINAL AFTER UNRESTRICTED RECOVERY |
| ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | 180.0 NOMINAL AS SUPPLIED |
| TEMP RATING | -55.0 CELSIUS AND 135.0 CELSIUS DEGC |
| DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY | 1.600 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| MAIN BODY LARGE END INSIDE DIAMETER | 1.740 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| MAIN BODY LARGE END INSIDE DIAMETER | 2.660 INCHES MINIMUM AS SUPPLIED IN |
| LARGE END WALL THICKNESS OF MAIN BODY | 0.150 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| STYLE DESIGNATOR | BOOT-90 DEGREES |
No substitute or cross-reference records for this part.