PartsTable
Technical Data Sheet
Download PDF

13229E0693-3 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

13229E0693-3: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM OVERALL, outside_diameter: 3.047 INCHES NOMINAL IN, special_features: RAISED SURFACE ON BOTH SIDES. 2" IPS PIPE SIZE/ 2.50" O.D.

TUBE SIZE, aperture_diameter: 2.370 INCHES NOMINAL IN, material_document_and_classification: MIL-83248 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S. Government catalog under NSN 5330-01-351-2757, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13229E0693-3
NSN: 5330-01-351-2757
FSC: 5330 — Packing and Gasket Materials
CAGE: 97403 — CECOM LR CENTER (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM OVERALL
outside_diameter3.047 INCHES NOMINAL IN
special_featuresRAISED SURFACE ON BOTH SIDES. 2" IPS PIPE SIZE/ 2.50" O.D. TUBE SIZE
aperture_diameter2.370 INCHES NOMINAL IN
material_document_and_classificationMIL-83248 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-351-2757
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13229E0693-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-83248 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 3.047 INCHES NOMINAL IN
•
APERTURE DIAMETER: 2.370 INCHES NOMINAL IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM OVERALL
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-83248 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER3.047 INCHES NOMINAL IN
APERTURE DIAMETER2.370 INCHES NOMINAL IN
SPECIAL FEATURESRAISED SURFACE ON BOTH SIDES. 2" IPS PIPE SIZE/ 2.50" O.D. TUBE SIZE
MATERIALRUBBER FLUOROCARBON CLASS FPM OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 3
120-07533-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
L40Y-2.50Reference document
Same NSN cross-reference
Reference document — Secondary reference
K40Y-2.50Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 13229E0693-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13229E0693-3?
13229E0693-3 is a GASKET.
What parts can replace 13229E0693-3?
There are 3 known substitutes for 13229E0693-3: 120-07533-3, L40Y-2.50, K40Y-2.50. Substitute compatibility should be verified for your specific system.
What is the NSN for 13229E0693-3?
13229E0693-3 is cataloged in the U.S. Government catalog under NSN 5330-01-351-2757. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13229E0693-3