PartsTable
Technical Data Sheet
Download PDF

13229E0114-7 — NUT,PLAIN,BLIND RIVET

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

13229E0114-7: NUT,PLAIN,BLIND RIVET.

The NUT,PLAIN,BLIND RIVET is a the manufacturer industrial component. Key specifications include nut_style: BLIND RIVET W/SMOOTH ROUND SHANK, head_style: FLAT, nut_length: 0.714 INCHES MINIMUM AND 0.744 INCHES MAXIMUM IN, head_height: 0.058 INCHES NOMINAL IN, nut_diameter: 0.460 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-350-8556, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13229E0114-7
NSN: 5310-01-350-8556
FSC: 5310 — Nuts and Washers
CAGE: 97403 — CECOM LR CENTER (USA)
SPECIFICATIONS
nut_styleBLIND RIVET W/SMOOTH ROUND SHANK
head_styleFLAT
nut_length0.714 INCHES MINIMUM AND 0.744 INCHES MAXIMUM IN
head_height0.058 INCHES NOMINAL IN
nut_diameter0.460 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
thread_class3B
head_diameter0.332 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
shank_end_typeOPEN
thread_directionRIGHT-HAND
nominal_thread_size0.250 INCHES IN
thread_quantity_per_inch20
NSN5310-01-350-8556
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 13229E0114-7 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.058 INCHES NOMINAL IN
•
NUT LENGTH: 0.714 INCHES MINIMUM AND 0.744 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
SHANK END TYPE: OPEN
•
HEAD STYLE: FLAT
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT DIAMETER: 0.460 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.058 INCHES NOMINAL IN
NUT LENGTH0.714 INCHES MINIMUM AND 0.744 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
SHANK END TYPEOPEN
HEAD STYLEFLAT
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT DIAMETER0.460 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
NUT STYLEBLIND RIVET W/SMOOTH ROUND SHANK
THREAD CLASS3B
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 13229E0114-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13229E0114-7?
13229E0114-7 is a NUT,PLAIN,BLIND RIVET.
What is the NSN for 13229E0114-7?
13229E0114-7 is cataloged in the U.S. Government catalog under NSN 5310-01-350-8556. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13229E0114-7