PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 132228
132228 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.134 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.334 INCHES MINIMUM AND 0.357 INCHES MAXIMUM IN, thread_length: 1.917 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN, fastener_length: 2.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-013-2228, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
132228
NSN: 5305-00-013-2228
FSC: 5305
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.134 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.334 INCHES MINIMUM AND 0.357 INCHES MAXIMUM IN
thread_length1.917 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
fastener_length2.000 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.216 INCHES IN
screw_surface_treatmentCADMIUM OR ZINC
thread_quantity_per_inch24
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-00-013-2228
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 132228 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD DIAMETER: 0.216 INCHES IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
THREAD LENGTH: 1.917 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
•
FASTENER LENGTH: 2.000 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD DIAMETER0.216 INCHES IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD LENGTH1.917 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HEAD HEIGHT0.134 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
FASTENER LENGTH2.000 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE
HEAD DIAMETER0.334 INCHES MINIMUM AND 0.357 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
ST11241Interchangeable
interchangeable cross-reference
interchangeable
MIL-S-83731Interchangeable
interchangeable cross-reference
interchangeable
MS25201-2Interchangeable
interchangeable cross-reference
interchangeable
404856Interchangeable
interchangeable cross-reference
interchangeable
404856-145Interchangeable
interchangeable cross-reference
interchangeable
FFS92TYPE1STYLE4SInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 132228?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 132228?
132228 is a SCREW,MACHINE.
What parts can replace 132228?
There are 7 known substitutes for 132228: ST11241, MIL-S-83731, MS25201-2 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 132228?
132228 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-013-2228. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 132228

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026