PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13220E2797
13220E2797 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.200 INCHES MINIMUM AND 0.207 INCHES MAXIMUM IN, material: COPPER ALLOY OVERALL, overall_width: 0.750 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: NICKEL OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-335-0032, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13220E2797
NSN: 5340-00-335-0032
FSC: 5340
CAGE: 97403 — CECOM LR CENTER (USA)
SPECIFICATIONS
diameter0.200 INCHES MINIMUM AND 0.207 INCHES MAXIMUM IN
materialCOPPER ALLOY OVERALL
overall_width0.750 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentNICKEL OVERALL
material_thickness0.025 INCHES NOMINAL IN
loop_inside_diameter0.215 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.673 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.363 INCHES NOMINAL IN
NSN5340-00-335-0032
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13220E2797 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: COPPER ALLOY OVERALL
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.673 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
DIAMETER: 0.200 INCHES MINIMUM AND 0.207 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.363 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE LOOP
MATERIALCOPPER ALLOY OVERALL
DISTANCE FROM LOOP CENTER TO TONGUE END0.673 INCHES NOMINAL IN
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
DIAMETER0.200 INCHES MINIMUM AND 0.207 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.363 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
OVERALL WIDTH0.750 INCHES NOMINAL IN
SURFACE TREATMENTNICKEL OVERALL
LOOP INSIDE DIAMETER0.215 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
1954Interchangeable
interchangeable cross-reference
interchangeable
70-2004-5294-7Interchangeable
interchangeable cross-reference
interchangeable
TIRAS SOF-LEX GRUESO/MEDIOInterchangeable
interchangeable cross-reference
interchangeable
P999Interchangeable
interchangeable cross-reference
interchangeable
P41Interchangeable
interchangeable cross-reference
interchangeable
51954Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13220E2797?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13220E2797?
13220E2797 is a CLAMP,LOOP.
What parts can replace 13220E2797?
There are 20 known substitutes for 13220E2797: 1954, 70-2004-5294-7, TIRAS SOF-LEX GRUESO/MEDIO and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13220E2797?
13220E2797 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-335-0032. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13220E2797

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026