PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13218E9243-52
13218E9243-52 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 45.0 DEGREES SECOND END, seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-460-6134, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13218E9243-52
NSN: 4720-00-460-6134
FSC: 4720
CAGE: 97403 — CECOM LR CENTER (USA)
SPECIFICATIONS
flow_angle45.0 DEGREES SECOND END
seat_angle37.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class2B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.750 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE SECOND END
outside_diameter1.250 INCHES NOMINAL IN
special_featuresTWO BAND MARKERS STAMPED W/CIRCUIT NO. 136
thread_directionRIGHT-HAND SECOND END
operating_pressure2250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure9000.0 POUNDS PER SQUARE INCH LBS
NSN4720-00-460-6134
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 13218E9243-52 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2B SECOND END
•
OUTER COVERING ENVIRONMENTAL PROTECTION: MILDEW RESISTANT AND OIL RESISTANT
•
THREAD QUANTITY PER INCH: 12 SECOND END
•
OPERATING PRESSURE: 2250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
•
THREAD SERIES DESIGNATOR: UN FIRST END
•
INSIDE SURFACE CONDITION: SMOOTH
•
SEAT ANGLE: 37.0 DEGREES SECOND END
•
END CONNECTION DESIGN: ELBOW SECOND END
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2B SECOND END
OUTER COVERING ENVIRONMENTAL PROTECTIONMILDEW RESISTANT AND OIL RESISTANT
THREAD QUANTITY PER INCH12 SECOND END
OPERATING PRESSURE2250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
THREAD SERIES DESIGNATORUN FIRST END
INSIDE SURFACE CONDITIONSMOOTH
SEAT ANGLE37.0 DEGREES SECOND END
END CONNECTION DESIGNELBOW SECOND END
HYDROSTATIC TEST PRESSURE4500.0 POUNDS PER SQUARE INCH LBS
THREAD QUANTITY PER INCH12 FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
25-2762-2Interchangeable
interchangeable cross-reference
interchangeable
M52471/2B002152Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-52471/2Interchangeable
interchangeable cross-reference
interchangeable
S8710Interchangeable
interchangeable cross-reference
interchangeable
8710Interchangeable
Intel Xeon Platinum 8170 26C 2.1GHz 35.75MB
interchangeable
M52471/2B2130260Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13218E9243-52?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13218E9243-52?
13218E9243-52 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 13218E9243-52?
There are 21 known substitutes for 13218E9243-52: 25-2762-2, M52471/2B002152, MIL-DTL-52471/2 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13218E9243-52?
13218E9243-52 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-460-6134. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13218E9243-52

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026