PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13216E6122
13216E6122 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, construction: SOLIDSOLID, overall_length: 7.560 INCHES NOMINAL7.560 INCHES NOMINAL IN, fabrication_method: SOLIDSOLID, cross-sectional_width: 0.380 INCHES NOMINAL0.380 INCHES NOMINAL IN, cross-sectional_height: 0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-208-4740, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13216E6122
NSN: 5330-01-208-4740
FSC: 5330
CAGE: 97403 — CECOM LR CENTER (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
constructionSOLIDSOLID
overall_length7.560 INCHES NOMINAL7.560 INCHES NOMINAL IN
fabrication_methodSOLIDSOLID
cross-sectional_width0.380 INCHES NOMINAL0.380 INCHES NOMINAL IN
cross-sectional_height0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencySEAL, H CHANNELSEAL, H CHANNEL
NSN5330-01-208-4740
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13216E6122 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONSTRUCTION: SOLIDSOLID
•
CROSS-SECTIONAL HEIGHT: 0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.380 INCHES NOMINAL0.380 INCHES NOMINAL IN
•
FABRICATION METHOD: SOLIDSOLID
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CONSTRUCTIONSOLIDSOLID
CROSS-SECTIONAL HEIGHT0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSEAL, H CHANNELSEAL, H CHANNEL
CROSS-SECTIONAL WIDTH0.380 INCHES NOMINAL0.380 INCHES NOMINAL IN
FABRICATION METHODSOLIDSOLID
OVERALL LENGTH7.560 INCHES NOMINAL7.560 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
339D827H30Interchangeable
interchangeable cross-reference
interchangeable
442Interchangeable
interchangeable cross-reference
interchangeable
K1166Interchangeable
interchangeable cross-reference
interchangeable
F80981Interchangeable
interchangeable cross-reference
interchangeable
335072Interchangeable
interchangeable cross-reference
interchangeable
G-373Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13216E6122?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13216E6122?
13216E6122 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace 13216E6122?
There are 17 known substitutes for 13216E6122: 339D827H30, 442, K1166 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13216E6122?
13216E6122 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-208-4740. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13216E6122

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026