PartsTable
Technical Data Sheet
Download PDF

13215E6675-3 — RESTRICTOR,FLUID FLOW

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

13215E6675-3: RESTRICTOR,FLUID FLOW.

The RESTRICTOR,FLUID FLOW is a the manufacturer industrial component. Key specifications include length: 0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN, material: STEEL, design_type: TUBULAR, orifice_diameter: 0.120 INCHES NOMINAL IN, outside_diameter: 0.370 INCHES NOMINAL IN, thread_provision: UNTHREADED LOCATION NOT OTHERWISE SPECIFIED. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-194-2165, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13215E6675-3
NSN: 4730-01-194-2165
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
length0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
materialSTEEL
design_typeTUBULAR
orifice_diameter0.120 INCHES NOMINAL IN
outside_diameter0.370 INCHES NOMINAL IN
thread_provisionUNTHREADED LOCATION NOT OTHERWISE SPECIFIED
NSN4730-01-194-2165
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 13215E6675-3 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
•
THREAD PROVISION: UNTHREADED LOCATION NOT OTHERWISE SPECIFIED
•
DESIGN TYPE: TUBULAR
•
OUTSIDE DIAMETER: 0.370 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
ORIFICE DIAMETER: 0.120 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
THREAD PROVISIONUNTHREADED LOCATION NOT OTHERWISE SPECIFIED
DESIGN TYPETUBULAR
OUTSIDE DIAMETER0.370 INCHES NOMINAL IN
MATERIALSTEEL
ORIFICE DIAMETER0.120 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
13215E6675Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 13215E6675-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13215E6675-3?
13215E6675-3 is a RESTRICTOR,FLUID FLOW.
What parts can replace 13215E6675-3?
There is 1 known substitute for 13215E6675-3: 13215E6675. Substitute compatibility should be verified for your specific system.
What is the NSN for 13215E6675-3?
13215E6675-3 is cataloged in the U.S. Government catalog under NSN 4730-01-194-2165. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13215E6675-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.