PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13214E6630-10
13214E6630-10 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include bore_diameter: 0.3130 INCHES MINIMUM AND 0.3140 INCHES MAXIMUM IN, overall_width: 0.4280 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN, alignment_type: RIGID, special_features: OIL HOLE IN OUTER RING, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL, overall_outside_diameter: 0.5000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-990-8234, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13214E6630-10
NSN: 3110-00-990-8234
FSC: 3110
CAGE: 91340 — MET-PRO CORPORATION (USA)
SPECIFICATIONS
bore_diameter0.3130 INCHES MINIMUM AND 0.3140 INCHES MAXIMUM IN
overall_width0.4280 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN
alignment_typeRIGID
special_featuresOIL HOLE IN OUTER RING
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter0.5000 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-990-8234
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 13214E6630-10 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
BORE DIAMETER: 0.3130 INCHES MINIMUM AND 0.3140 INCHES MAXIMUM IN
•
OVERALL OUTSIDE DIAMETER: 0.5000 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
TECHNICAL CHARACTERISTICS (FLIS)
ALIGNMENT TYPERIGID
SPECIAL FEATURESOIL HOLE IN OUTER RING
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
BORE DIAMETER0.3130 INCHES MINIMUM AND 0.3140 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.5000 INCHES NOMINAL IN
OVERALL WIDTH0.4280 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
8130869Interchangeable
interchangeable cross-reference
interchangeable
MS17131Interchangeable
interchangeable cross-reference
interchangeable
A28229Interchangeable
interchangeable cross-reference
interchangeable
1093398Interchangeable
interchangeable cross-reference
interchangeable
817-72Interchangeable
interchangeable cross-reference
interchangeable
ASTM F 2162Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13214E6630-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13214E6630-10?
13214E6630-10 is a BEARING,ROLLER,NEEDLE.
What parts can replace 13214E6630-10?
There are 32 known substitutes for 13214E6630-10: 8130869, MS17131, A28229 and 29 more. Substitute compatibility should be verified for your specific system.
Is 13214E6630-10 still available?
13214E6630-10 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13214E6630-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026