PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13214E2501-8
13214E2501-8 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.375 INCHES NOMINAL IN, connection_style: SWIVEL NUT FLARE FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-446-7541, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13214E2501-8
NSN: 4720-01-446-7541
FSC: 4720
CAGE: 97403 — CECOM LR CENTER (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class2B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.375 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
operating_pressure4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure16000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.562 INCHES FIRST END IN
end_connection_designSTRAIGHT FIRST END
NSN4720-01-446-7541
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 13214E2501-8 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BURST TEST PRESSURE: 16000.0 POUNDS PER SQUARE INCH LBS
•
MEASURING METHOD AND LENGTH: 66.000 INCHES NOMINAL OVERALL IN
•
SEAT ANGLE: 37.0 DEGREES FIRST END
•
CONNECTION STYLE: SWIVEL NUT FLARE FIRST END
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
BURST TEST PRESSURE16000.0 POUNDS PER SQUARE INCH LBS
MEASURING METHOD AND LENGTH66.000 INCHES NOMINAL OVERALL IN
SEAT ANGLE37.0 DEGREES FIRST END
CONNECTION STYLESWIVEL NUT FLARE FIRST END
END CONNECTION DESIGNSTRAIGHT FIRST END
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
END ITEM IDENTIFICATIONUSED ON THE M9 ACE
INSIDE SURFACE CONDITIONSMOOTH
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
13214E2501Interchangeable
interchangeable cross-reference
interchangeable
13214E2501-1Interchangeable
interchangeable cross-reference
interchangeable
FA2138GGG0246Interchangeable
interchangeable cross-reference
interchangeable
FK1329GGG0155Interchangeable
interchangeable cross-reference
interchangeable
13214E2501-3Interchangeable
interchangeable cross-reference
interchangeable
13214E2501-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13214E2501-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13214E2501-8?
13214E2501-8 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 13214E2501-8?
There are 20 known substitutes for 13214E2501-8: 13214E2501, 13214E2501-1, FA2138GGG0246 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13214E2501-8?
13214E2501-8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-446-7541. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13214E2501-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026