PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13214E2495
13214E2495 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.243 INCHES NOMINAL IN, special_features: CLEAN HOSE ASSEMBLY PER SPEC MIL-H-13531 AND CAP ENDS PER SPEC MIL-C-5501, supplementary_features: FITTINGS = .4375 UNF-28 REF, end_item_identification: 2350-00-808-7100, TRACTOR, FULL TRACKED, ARMORED DOZER-S, cross-sectional_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-192-9637, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13214E2495
NSN: 4720-01-192-9637
FSC: 4720
CAGE: 97403 — CECOM LR CENTER (USA)
SPECIFICATIONS
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.243 INCHES NOMINAL IN
special_featuresCLEAN HOSE ASSEMBLY PER SPEC MIL-H-13531 AND CAP ENDS PER SPEC MIL-C-5501
supplementary_featuresFITTINGS = .4375 UNF-28 REF
end_item_identification2350-00-808-7100, TRACTOR, FULL TRACKED, ARMORED DOZER-S
cross-sectional_shape_styleROUND
measuring_method_and_length22.620 INCHES NOMINAL OVERALL IN
specification/standard_data81349 - MIL-H-13531 TYPE II OR TYPE III CLASS A GOVERNMENT STANDARD
nominal_pipe_size_accommodated0.437 INCHES FIRST END IN
part_name_assigned_by_controlling_agencyHOSE ASSEMBLY
NSN4720-01-192-9637
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 13214E2495 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BURST TEST PRESSURE: 20000.0 POUNDS PER SQUARE INCH LBS
•
OUTSIDE DIAMETER: 0.690 INCHES NOMINAL IN
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
INSIDE DIAMETER: 0.250 INCHES NOMINAL IN
•
THREAD CLASS: 2B FIRST END
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
BURST TEST PRESSURE20000.0 POUNDS PER SQUARE INCH LBS
OUTSIDE DIAMETER0.690 INCHES NOMINAL IN
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
INSIDE DIAMETER0.250 INCHES NOMINAL IN
THREAD CLASS2B FIRST END
THREAD DIRECTIONRIGHT-HAND FIRST END
END CONNECTION DESIGNSTRAIGHT FIRST END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
MINIMUM INSIDE BENDING RADIUS4.000 INCHES IN
TEMP RATING-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
956857Interchangeable
interchangeable cross-reference
interchangeable
W368Interchangeable
interchangeable cross-reference
interchangeable
3201XR1AInterchangeable
interchangeable cross-reference
interchangeable
13214E2495Interchangeable
interchangeable cross-reference
interchangeable
FA2138EEE0225Interchangeable
interchangeable cross-reference
interchangeable
A2660Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13214E2495?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13214E2495?
13214E2495 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 13214E2495?
There are 24 known substitutes for 13214E2495: 956857, W368, 3201XR1A and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13214E2495?
13214E2495 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-192-9637. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13214E2495

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026