PartsTable
Technical Data Sheet
Download PDF

13214E2478 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

13214E2478: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES ALL ENDS, temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, connection_type: THREADED INTERNAL HOSE ALL ENDS, inside_diameter: 0.480 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN, connection_style: SWIVEL NUT FLARE ALL ENDS, outside_diameter: 1.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-179-9190, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13214E2478
NSN: 4720-01-179-9190
NIINs: 011799190, 014333045, 015636545
FSC: 4720 — Hose and Flexible Tubing
CAGE: 97403 — CECOM LR CENTER (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES ALL ENDS
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
connection_typeTHREADED INTERNAL HOSE ALL ENDS
inside_diameter0.480 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
connection_styleSWIVEL NUT FLARE ALL ENDS
outside_diameter1.000 INCHES NOMINAL IN
special_markingsMARKED WITH ONE BANDS AT EACH END; BAND A: WINCH-C2 (FWD), BAND B: PRI MANF-C2
thread_directionRIGHT-HAND ALL ENDS
operating_pressure5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure20000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.750 INCHES ALL ENDS IN
end_connection_designSTRAIGHT ALL ENDS
NSN4720-01-179-9190
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 13214E2478 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 3
A1267-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
13214E2478-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
650626-01Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 13214E2478?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13214E2478?
13214E2478 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 13214E2478?
There are 3 known substitutes for 13214E2478: A1267-1, 13214E2478-1, 650626-01. Substitute compatibility should be verified for your specific system.
What is the NSN for 13214E2478?
13214E2478 is cataloged in the U.S. Government catalog under NSN 4720-01-179-9190. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13214E2478

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.