PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13211E6747
13211E6747 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.312 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 0.750 INCHES NOMINAL IN, style_designator: CENTER MOUNT, surface_treatment: ANODIZE BAND, material_thickness: 0.109 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-103-8813, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13211E6747
NSN: 5340-00-103-8813
FSC: 5340
CAGE: 97403 — CECOM LR CENTER (USA)
SPECIFICATIONS
diameter0.312 INCHES NOMINAL IN
materialSTEEL BAND
overall_width0.750 INCHES NOMINAL IN
style_designatorCENTER MOUNT
surface_treatmentANODIZE BAND
material_thickness0.109 INCHES NOMINAL IN
loop_inside_diameter4.375 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole2.875 INCHES NOMINAL IN
NSN5340-00-103-8813
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13211E6747 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL BAND
•
LOOP INSIDE DIAMETER: 4.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CENTER MOUNT
•
DIAMETER: 0.312 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 2.875 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.109 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIALSTEEL BAND
LOOP INSIDE DIAMETER4.375 INCHES NOMINAL IN
STYLE DESIGNATORCENTER MOUNT
DIAMETER0.312 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE2.875 INCHES NOMINAL IN
MATERIAL THICKNESS0.109 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
13542Interchangeable
interchangeable cross-reference
interchangeable
1234724Interchangeable
interchangeable cross-reference
interchangeable
8851580Interchangeable
interchangeable cross-reference
interchangeable
5970006858609Interchangeable
interchangeable cross-reference
interchangeable
SM-A-984739Interchangeable
interchangeable cross-reference
interchangeable
27906Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13211E6747?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13211E6747?
13211E6747 is a CLAMP,LOOP.
What parts can replace 13211E6747?
There are 7 known substitutes for 13211E6747: 13542, 1234724, 8851580 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13211E6747?
13211E6747 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-103-8813. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13211E6747

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026