PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13206E4482-2
13206E4482-2 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,BEVEL is a the manufacturer industrial component. Key specifications include material: IRON OVERALL, hole_diameter: 0.520 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN, overall_width: 1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM IN, major_thickness: 0.312 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, minor_thickness: 0.125 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN, style_designator: BEVEL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-399-0995, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13206E4482-2
NSN: 5310-00-399-0995
FSC: 5310
CAGE: 97403 — CECOM LR CENTER (USA)
SPECIFICATIONS
materialIRON OVERALL
hole_diameter0.520 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
overall_width1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM IN
major_thickness0.312 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
minor_thickness0.125 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
style_designatorBEVEL
surface_treatmentCADMIUM OVERALL
material_document_and_classificationSTM A47 GR 32510 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
flat_side_distance_between_thick_and_thin_edges1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM IN
NSN5310-00-399-0995
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 13206E4482-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.520 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
•
MAJOR THICKNESS: 0.312 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: STM A47 GR 32510 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: BEVEL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MINOR THICKNESS: 0.125 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.520 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
OVERALL WIDTH1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM IN
MAJOR THICKNESS0.312 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSTM A47 GR 32510 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATORBEVEL
SURFACE TREATMENTCADMIUM OVERALL
MINOR THICKNESS0.125 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
FLAT SIDE DISTANCE BETWEEN THICK AND THIN EDGES1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM IN
MATERIALIRON OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
38305Interchangeable
interchangeable cross-reference
interchangeable
P-18606Interchangeable
interchangeable cross-reference
interchangeable
1229D1278Interchangeable
interchangeable cross-reference
interchangeable
4258Interchangeable
interchangeable cross-reference
interchangeable
04258Interchangeable
interchangeable cross-reference
interchangeable
383-04Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13206E4482-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13206E4482-2?
13206E4482-2 is a WASHER,BEVEL.
What parts can replace 13206E4482-2?
There are 7 known substitutes for 13206E4482-2: 38305, P-18606, 1229D1278 and 4 more. Substitute compatibility should be verified for your specific system.
Is 13206E4482-2 still available?
13206E4482-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13206E4482-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026