PartsTable
Technical Data Sheet
Download PDF

13206E0930 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

13206E0930: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1212 OR STEEL COMP 1118 OVERALL, nut_style: ROUND, nut_diameter: 2.048 INCHES MINIMUM AND 2.068 INCHES MAXIMUM IN, thread_class: 3B, nut_thickness: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN, thread_series: UNEF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-867-8747, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13206E0930
NSN: 5310-00-867-8747
FSC: 5310 — Nuts and Washers
CAGE: 97403 — CECOM LR CENTER (USA)
SPECIFICATIONS
materialSTEEL COMP 1212 OR STEEL COMP 1118 OVERALL
nut_styleROUND
nut_diameter2.048 INCHES MINIMUM AND 2.068 INCHES MAXIMUM IN
thread_class3B
nut_thickness0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
thread_seriesUNEF
thread_directionRIGHT-HAND
drive_point_depth0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
drive_point_width0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
surface_treatmentOXIDE OVERALL
nominal_thread_size1.375 INCHES IN
drive_point_quantity4
NSN5310-00-867-8747
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 13206E0930 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNEF
•
DRIVE POINT WIDTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.375 INCHES IN
•
NUT DIAMETER: 2.048 INCHES MINIMUM AND 2.068 INCHES MAXIMUM IN
•
DRIVE POINT DEPTH: 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
•
NUT THICKNESS: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
•
SURFACE TREATMENT: OXIDE OVERALL
TECHNICAL CHARACTERISTICS
THREAD SERIESUNEF
DRIVE POINT WIDTH0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.375 INCHES IN
NUT DIAMETER2.048 INCHES MINIMUM AND 2.068 INCHES MAXIMUM IN
DRIVE POINT DEPTH0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
NUT THICKNESS0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
SURFACE TREATMENTOXIDE OVERALL
DRIVE POINT QUANTITY4
NUT STYLEROUND
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
ERC213Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 13206E0930?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13206E0930?
13206E0930 is a NUT,PLAIN,ROUND.
What parts can replace 13206E0930?
There is 1 known substitute for 13206E0930: ERC213. Substitute compatibility should be verified for your specific system.
What is the NSN for 13206E0930?
13206E0930 is cataloged in the U.S. Government catalog under NSN 5310-00-867-8747. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13206E0930

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.