PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13200E8813
13200E8813 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.880 INCHES NOMINAL IN, special_features: C-SLOT 0.120 IN. WIDE ON INSIDE EDGE TERMINATING 0.500 IN.

FROM CENTER IN, style_designator: NON-CIRCULAR, aperture_diameter: 2.500 INCHES NOMINAL IN, bolt_circle_diameter: 3.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-792-6213, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13200E8813
NSN: 5330-00-792-6213
FSC: 5330
CAGE: 81336 — CHIEF OF ENGINEERS DEPT OF ARMY (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYETHER URETHANE CLASS EU OR RUBBER POLYESTER URETHANE CLASS AU OVERALL
hole_diameter0.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.880 INCHES NOMINAL IN
special_featuresC-SLOT 0.120 IN. WIDE ON INSIDE EDGE TERMINATING 0.500 IN. FROM CENTER IN
style_designatorNON-CIRCULAR
aperture_diameter2.500 INCHES NOMINAL IN
bolt_hole_quantity3
bolt_circle_diameter3.500 INCHES NOMINAL IN
outside_corner_radius0.500 INCHES NOMINAL IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center1.940 INCHES NOMINAL IN
NSN5330-00-792-6213
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13200E8813 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT CIRCLE DIAMETER: 3.500 INCHES NOMINAL IN
•
APERTURE DIAMETER: 2.500 INCHES NOMINAL IN
•
SIDE RADIUS FROM GASKET CENTER: 1.940 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
BOLT CIRCLE DIAMETER3.500 INCHES NOMINAL IN
APERTURE DIAMETER2.500 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER1.940 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.500 INCHES NOMINAL IN
SPECIAL FEATURESC-SLOT 0.120 IN. WIDE ON INSIDE EDGE TERMINATING 0.500 IN. FROM CENTER IN
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL WIDTH4.880 INCHES NOMINAL IN
BOLT HOLE QUANTITY3
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
TFIM25.0217-094Interchangeable
interchangeable cross-reference
interchangeable
241Interchangeable
interchangeable cross-reference
interchangeable
3701-0098Interchangeable
interchangeable cross-reference
interchangeable
X512Interchangeable
interchangeable cross-reference
interchangeable
383-9Interchangeable
interchangeable cross-reference
interchangeable
278-1778-00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13200E8813?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13200E8813?
13200E8813 is a GASKET.
What parts can replace 13200E8813?
There are 11 known substitutes for 13200E8813: TFIM25.0217-094, 241, 3701-0098 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13200E8813?
13200E8813 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-792-6213. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13200E8813

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026