132.124-9 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

132.124-9: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: RECTANGULAR W/MOUNTING HOLES/SLOTS, body_width: 0.190 INCHES NOMINAL IN, body_height: 0.315 INCHES NOMINAL IN, body_length: 1.125 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.058 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-782-9560, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 132.124-9

NSN: 5905-00-782-9560
NIINs: 007829560, 015033610
FSC: 5905 — Resistor
CAGE: C1798 — AEROMARITIME SYSTEMBAU GMBH (DEU)

SPECIFICATIONS

body_style	RECTANGULAR W/MOUNTING HOLES/SLOTS
body_width	0.190 INCHES NOMINAL IN
body_height	0.315 INCHES NOMINAL IN
body_length	1.125 INCHES NOMINAL IN
shaft_style	ROUND, SLOTTED
shaft_length	0.058 INCHES NOMINAL IN
actuator_type	SINGLE SHAFT
overall_width	0.190 INCHES NOMINAL IN
overall_height	0.465 INCHES NOMINAL IN
overall_length	1.308 INCHES NOMINAL IN
shaft_diameter	0.115 INCHES NOMINAL IN
mounting_method	UNTHREADED HOLE(S)
NSN	5905-00-782-9560

COMPONENT DIAGRAM

KEY FEATURES

•

MAXIMUM RUNNING TORQUE: 5.00 INCH-OUNCES IN

•

ELECTRICAL RESISTANCE PER SECTION: 500.0 OHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 150.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

MOUNTING FACILITY QUANTITY: 2

•

SHAFT DIAMETER: 0.115 INCHES NOMINAL IN

•

BODY STYLE: RECTANGULAR W/MOUNTING HOLES/SLOTS

TECHNICAL CHARACTERISTICS

MAXIMUM RUNNING TORQUE	5.00 INCH-OUNCES IN
OVERALL HEIGHT	0.465 INCHES NOMINAL IN
ELECTRICAL RESISTANCE PER SECTION	500.0 OHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
SECTION QUANTITY	1
MOUNTING FACILITY QUANTITY	2
SHAFT DIAMETER	0.115 INCHES NOMINAL IN
BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS
MOUNTING METHOD	UNTHREADED HOLE(S)
BODY WIDTH	0.190 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 4

3059J1-501Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

3052S1-501Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

922433-0013Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

922433-13Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 132.124-9?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 132.124-9?

132.124-9 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).

What parts can replace 132.124-9?

There are 4 known substitutes for 132.124-9: 3059J1-501, 3052S1-501, 922433-0013 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 132.124-9?

132.124-9 is cataloged in the U.S. Government catalog under NSN 5905-00-782-9560. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

132.124-9 — RESISTOR,VARIABLE,NONWIRE WOUND,

Request a Quote — 132.124-9