PartsTable
Technical Data Sheet
Download PDF

132-566 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

132-566: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 0.1 RADIANS NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 2.620 INCHES NOMINAL IN, first_leg_length: 2.000 INCHES NOMINAL IN, second_leg_angle: 0.1 RADIANS NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-503-9404, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
132-566
NSN: 5340-01-503-9404
FSC: 5340 — Hardware, Commercial
CAGE: 03533 — CRANE CARRIER COMPANY, LLC (USA)
SPECIFICATIONS
materialSTEEL
first_leg_angle0.1 RADIANS NOMINAL
first_leg_styleCORNER RADIUS
first_leg_width2.620 INCHES NOMINAL IN
first_leg_length2.000 INCHES NOMINAL IN
second_leg_angle0.1 RADIANS NOMINAL
second_leg_styleEND RADIUS
second_leg_width2.620 INCHES NOMINAL IN
style_designatorADJACENT ANGLES
second_leg_length2.750 INCHES NOMINAL IN
mounting_hole_typePLAIN
first_leg_thickness0.060 INCHES NOMINAL IN
NSN5340-01-503-9404
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 132-566 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 1.310 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 0.1 RADIANS NOMINAL
•
CENTER SECTION THICKNESS: 0.060 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG ANGLE: 0.1 RADIANS NOMINAL
•
SECOND LEG WIDTH: 2.620 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 2.750 INCHES NOMINAL IN
•
SECOND LEG SLOT WIDTH: 0.380 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH1.310 INCHES NOMINAL IN
FIRST LEG ANGLE0.1 RADIANS NOMINAL
CENTER SECTION THICKNESS0.060 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG ANGLE0.1 RADIANS NOMINAL
SECOND LEG WIDTH2.620 INCHES NOMINAL IN
SECOND LEG LENGTH2.750 INCHES NOMINAL IN
SECOND LEG SLOT WIDTH0.380 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLENO HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH1.310 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
A132-566Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
B132-0566Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 132-566?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 132-566?
132-566 is a BRACKET,DOUBLE ANGLE.
What parts can replace 132-566?
There are 2 known substitutes for 132-566: A132-566, B132-0566. Substitute compatibility should be verified for your specific system.
What is the NSN for 132-566?
132-566 is cataloged in the U.S. Government catalog under NSN 5340-01-503-9404. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 132-566

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.