PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 132-031E
132-031E ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.144 INCHES NOMINAL IN, material: PLASTIC POLYVINYLIDENE CHLORIDE BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_thickness: 0.060 INCHES NOMINAL IN, loop_inside_diameter: 0.369 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-115-6341, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
132-031E
NSN: 5340-00-115-6341
FSC: 5340
CAGE: 90073 — CMC ELECTRONICS INC (CAN)
SPECIFICATIONS
diameter0.144 INCHES NOMINAL IN
materialPLASTIC POLYVINYLIDENE CHLORIDE BAND
overall_width0.375 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_thickness0.060 INCHES NOMINAL IN
loop_inside_diameter0.369 INCHES NOMINAL IN
cushioning_environmental_protectionFLAME RESISTANT AND WEATHER RESISTANT
distance_from_loop_center_to_tongue_end0.588 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.400 INCHES NOMINAL IN
NSN5340-00-115-6341
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 132-031E MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.369 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYVINYLIDENE CHLORIDE BAND
•
CUSHIONING ENVIRONMENTAL PROTECTION: FLAME RESISTANT AND WEATHER RESISTANT
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.144 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.400 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.369 INCHES NOMINAL IN
MATERIALPLASTIC POLYVINYLIDENE CHLORIDE BAND
OVERALL WIDTH0.375 INCHES NOMINAL IN
CUSHIONING ENVIRONMENTAL PROTECTIONFLAME RESISTANT AND WEATHER RESISTANT
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.144 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.400 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.588 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
X2AUpgraded Successor
successor cross-reference
successor
X2Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 132-031E?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 132-031E?
132-031E is a CLAMP,LOOP.
What parts can replace 132-031E?
There are 2 known substitutes for 132-031E: X2A, X2. Substitute compatibility should be verified for your specific system.
What is the NSN for 132-031E?
132-031E is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-115-6341. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 132-031E

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026