PartsTable
Technical Data Sheet
Download PDF

131C711H01 — SEAL,NONMETALLIC STRIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

131C711H01: SEAL,NONMETALLIC STRIP.

The SEAL,NONMETALLIC STRIP is a the manufacturer industrial component. Key specifications include construction: SOLID, end_cut_angle: 45.0 DEGREES, overall_length: 25.850 INCHES MINIMUM AND 25.910 INCHES MAXIMUM IN, attachment_method: ROUND HOLE, cross-sectional_height: 0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN, attachment_hole_diameter: 0.310 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-402-7195, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
131C711H01
NSN: 5330-00-402-7195
FSC: 5330 — Packing and Gasket Materials
CAGE: 48306 — NORTHROP GRUMMAN SUPPORT SERVICES CORP (USA)
SPECIFICATIONS
constructionSOLID
end_cut_angle45.0 DEGREES
overall_length25.850 INCHES MINIMUM AND 25.910 INCHES MAXIMUM IN
attachment_methodROUND HOLE
cross-sectional_height0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN
attachment_hole_diameter0.310 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
attachment_feature_quantity10
cross-sectional_shape_styleRECTANGULAR
NSN5330-00-402-7195
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 131C711H01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ATTACHMENT HOLE DIAMETER: 0.310 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
•
ATTACHMENT FEATURE QUANTITY: 10
•
CROSS-SECTIONAL HEIGHT: 0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
END CUT ANGLE: 45.0 DEGREES
•
CONSTRUCTION: SOLID
•
ATTACHMENT METHOD: ROUND HOLE
TECHNICAL CHARACTERISTICS
ATTACHMENT HOLE DIAMETER0.310 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
ATTACHMENT FEATURE QUANTITY10
CROSS-SECTIONAL HEIGHT0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN
OVERALL LENGTH25.850 INCHES MINIMUM AND 25.910 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
END CUT ANGLE45.0 DEGREES
CONSTRUCTIONSOLID
ATTACHMENT METHODROUND HOLE
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 131C711H01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 131C711H01?
131C711H01 is a SEAL,NONMETALLIC STRIP.
What is the NSN for 131C711H01?
131C711H01 is cataloged in the U.S. Government catalog under NSN 5330-00-402-7195. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 131C711H01