PartsTable
Technical Data Sheet
PartsTable / MRO / 131994
131994 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The ROD,TRANSFER is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.181 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.750 INCHES MINIMUM IN, screw_material: STEEL, fastener_length: 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-426-9529, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 131994
NSN: 5305-00-426-9529
FSC: 5305
CAGE: 21119 — EVINRUDE MOTORS PRODUCT GROUP OF OUTBOARD MARINE CORP (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.181 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
thread_class2A A
thread_length0.750 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
hardness_rating82.0 ROCKWELL C NOMINAL
thread_directionRIGHT-HAND
width_between_flats0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentCADMIUM
thread_quantity_per_inch20
NSN5305-00-426-9529
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 131994 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: HEXAGON
•
FASTENER LENGTH: 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEHEXAGON
FASTENER LENGTH1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD CLASS2A A
SCREW MATERIALSTEEL
THREAD QUANTITY PER INCH20
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
010105059Interchangeable
interchangeable cross-reference
interchangeable
500 00681 00Interchangeable
interchangeable cross-reference
interchangeable
55-0382-6811CSInterchangeable
interchangeable cross-reference
interchangeable
131994Interchangeable
interchangeable cross-reference
interchangeable
302030Interchangeable
interchangeable cross-reference
interchangeable
2HS265Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 131994?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 131994?
131994 is a ROD,TRANSFER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 131994?
There are 6 known substitutes for 131994: 010105059, 500 00681 00, 55-0382-6811CS and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 131994?
131994 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-426-9529. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 131994

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026