13195080 — CLAMP ASSEMBLY

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

13195080: CLAMP ASSEMBLY.

The CLAMP ASSEMBLY is a the manufacturer industrial component. Key specifications include end_item_identification: 1440-01-229-4109. This part is cataloged in the U.S.

Government catalog under NSN 1440-01-115-3295, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

13195080

NSN: 1440-01-115-3295
FSC: 1440 — Launchers, Guided Missile
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)

SPECIFICATIONS

end_item_identification	1440-01-229-4109
NSN	1440-01-115-3295

COMPONENT DIAGRAM

KEY FEATURES

•

GENERAL CHARACTERISTICS ITEM DESCRIPTION: CONSIST OF;ONE PLATE,SWITCH;ONE BUSHING,PLUNGER;24 SCREWS;SEVEN SCREW,SET;THREE SPACERS;6INCH LOCKWIRE;ONE NUT;16 PIN,SPRING;ONE COTTER PIN;ONE PIN;ONE HOUSING SUPPORT;CABLE ASSEMBLY;STOP,ADJ,PAWL/STOP PAWL;PAWL INTERLOCK;UMBILICAL LEVER;LINK CONNECTOR;LEVER SPRING;SPRING HELICAL;PIN LINK;2 PIN,STRAIGHT;SWITCH,LEVER;SHIM SWITCH;COVER,BRIDGE CLAMP;RETAINING RING;CAM,ACTUATING;LINK,SWITCH LEVER;ARM,ACT.SW.LEVER;LOCKING HANDLE;SPRING,SPIRAL,TORSION;TWO PIN LOCKS;KNOB;SHAFT SWITCH;LOCKINGSHAFT;CONTROL SHAFT;TWO SHIMS;TWO THRUST WASHER;INTERLOCKING SHAFT;ONE MOUNTSWITCH IN

•

TEST DATA DOCUMENT: 18876-13195080 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

TECHNICAL CHARACTERISTICS

GENERAL CHARACTERISTICS ITEM DESCRIPTION	CONSIST OF;ONE PLATE,SWITCH;ONE BUSHING,PLUNGER;24 SCREWS;SEVEN SCREW,SET;THREE SPACERS;6INCH LOCKWIRE;ONE NUT;16 PIN,SPRING;ONE COTTER PIN;ONE PIN;ONE HOUSING SUPPORT;CABLE ASSEMBLY;STOP,ADJ,PAWL/STOP PAWL;PAWL INTERLOCK;UMBILICAL LEVER;LINK CONNECTOR;LEVER SPRING;SPRING HELICAL;PIN LINK;2 PIN,STRAIGHT;SWITCH,LEVER;SHIM SWITCH;COVER,BRIDGE CLAMP;RETAINING RING;CAM,ACTUATING;LINK,SWITCH LEVER;ARM,ACT.SW.LEVER;LOCKING HANDLE;SPRING,SPIRAL,TORSION;TWO PIN LOCKS;KNOB;SHAFT SWITCH;LOCKINGSHAFT;CONTROL SHAFT;TWO SHIMS;TWO THRUST WASHER;INTERLOCKING SHAFT;ONE MOUNTSWITCH IN
TEST DATA DOCUMENT	18876-13195080 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
END ITEM IDENTIFICATION	1440-01-229-4109

OTHER ITEMS IN FSC 1440 — Launchers, Guided Missile

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

1440-00-000-0161 1440-00-000-0162 1440-00-001-1268 1440-00-001-2476 1440-00-001-2477 1440-00-001-3999 1440-00-001-4000 1440-00-001-4598

SUBSTITUTES & CROSS-REFERENCES 2

1440011153295Reference document

Same NSN cross-reference

Reference document — Informative reference only

2428393-1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementDemilitarization required — critical (Q)

Ready to buy 13195080?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 13195080?

13195080 is a CLAMP ASSEMBLY.

What parts can replace 13195080?

There are 2 known substitutes for 13195080: 1440011153295, 2428393-1. Substitute compatibility should be verified for your specific system.

What is the NSN for 13195080?

13195080 is cataloged in the U.S. Government catalog under NSN 1440-01-115-3295. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

13195080 — CLAMP ASSEMBLY

Request a Quote — 13195080