PartsTable / COMPONENT / 1319-5
1319-5
✓ Verified by PartsTable
Clementoni · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
- Learn how to create translucent, coloured, fluorescent and shining crystals!<br>- A rich lab to create lots of glow-in-the-dark crystals!<br>- Thanks to plaster and chemicals included you will create fantastic crystals shaped as animals or trees. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-366-6558, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
1319-5
NSN: 5330-00-366-6558 FSC: 5330 CAGE: 44185 — TLD WOLLARD LLC (USA)
SPECIFICATIONS
material STEEL CORROSION RESISTING OVERALL body_length 3.500 INCHES NOMINAL IN inclosure_type HERMETICALLY SEALED overall_length 3.891 INCHES NOMINAL IN mounting_method THREADED STUD(S) SINGLE GROUP frequency_rating 380.0 HERTZ MINIMUM AND 1.0 KILOHERTZ MAXIMUM SINGLE COMPONENT outside_diameter 2.750 INCHES NOMINAL IN special_features SMALLEST STEP DIAMETER 0.0932 INCHES MINIMUM AND 0.0935 INCHES MAXIMUM; LARGEST STEP DIAMETER 0.600 INCHES MAXIMUM IN style_designator CIRCULAR aperture_diameter 2.298 INCHES MINIMUM AND 2.312 INCHES MAXIMUM IN nominal_thread_size 0.164 INCHES SINGLE GROUP IN winding_power_rating 117.0 VOLTS-AMPERES SINGLE COMPONENT SECOND SECONDARY NSN 5330-00-366-6558
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 1319-5
MFR: Clementoni
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• APERTURE DIAMETER: 2.298 INCHES MINIMUM AND 2.312 INCHES MAXIMUM IN
• CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
• STYLE DESIGNATOR: CIRCULAR
• OUTSIDE DIAMETER: 2.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION APERTURE DIAMETER 2.298 INCHES MINIMUM AND 2.312 INCHES MAXIMUM IN CROSS-SECTIONAL THICKNESS 0.062 INCHES NOMINAL IN STYLE DESIGNATOR CIRCULAR MATERIAL PAPER OVERALL OUTSIDE DIAMETER 2.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
27239 Interchangeable interchangeable cross-reference
interchangeable
42981 Interchangeable interchangeable cross-reference
interchangeable
3CE87 Interchangeable interchangeable cross-reference
interchangeable
78215 Interchangeable interchangeable cross-reference
interchangeable
13195 Interchangeable interchangeable cross-reference
interchangeable
B86K0022 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 1319-5?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1319-5?
1319-5 is a DIFFERENTIAL GEAR UNIT manufactured by Clementoni.
What parts can replace 1319-5?
There are 12 known substitutes for 1319-5: 27239, 42981, 3CE87 and 9 more. Substitute compatibility should be verified for your specific system.
Is 1319-5 still available?
1319-5 is currently cancelled.