The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, length: 0.583 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN, material: STEEL OVERALL, hole_diameter: 0.131 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN, overall_height: 0.670 INCHES MINIMUM AND 0.680 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.
Government catalog under NSN 5340-01-152-9136, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
13153435-1
NSN:5340-01-152-9136 FSC:5340 — Hardware, Commercial CAGE:18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
width
0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
length
0.583 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
material
STEEL OVERALL
hole_diameter
0.131 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
overall_height
0.670 INCHES MINIMUM AND 0.680 INCHES MAXIMUM IN
mounting_method
UNTHREADED HOLE(S)
special_features
GOLDEN IRIDITE
surface_treatment
CADMIUM AND CHROMATE OVERALL
material_thickness
0.013 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN
loop/holding_dimension
0.557 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
distance_from_loop_center_to_end
0.406 INCHES NOMINAL IN
material_document_and_classification
ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN
5340-01-152-9136
COMPONENT DIAGRAM
KEY FEATURES
•
LENGTH: 0.583 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.557 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.013 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.406 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT
0.670 INCHES MINIMUM AND 0.680 INCHES MAXIMUM IN
LENGTH
0.583 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHOD
UNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATION
ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION
0.557 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.013 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END
0.406 INCHES NOMINAL IN
SPECIAL FEATURES
GOLDEN IRIDITE
SURFACE TREATMENT
CADMIUM AND CHROMATE OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13153435-1?
13153435-1 is a CLIP,SPRING TENSION.
What parts can replace 13153435-1?
There is 1 known substitute for 13153435-1: 6012-21A. Substitute compatibility should be verified for your specific system.
What is the NSN for 13153435-1?
13153435-1 is cataloged in the U.S. Government catalog under NSN 5340-01-152-9136. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.