PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 131463H
131463H ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PLASTIC PHENOLIC AND COTTON OVERALL, outside_diameter: 0.625 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.252 INCHES MINIMUM AND 0.257 INCHES MAXIMUM IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-517-3143, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
131463H
NSN: 5330-00-517-3143
FSC: 5330
CAGE: 92679 — NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ (USA)
SPECIFICATIONS
materialPLASTIC PHENOLIC AND COTTON OVERALL
outside_diameter0.625 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.252 INCHES MINIMUM AND 0.257 INCHES MAXIMUM IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-P-15035,TY FBM MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-517-3143
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 131463H MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.625 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.252 INCHES MINIMUM AND 0.257 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
MATERIAL: PLASTIC PHENOLIC AND COTTON OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-15035,TY FBM MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.625 INCHES NOMINAL IN
APERTURE DIAMETER0.252 INCHES MINIMUM AND 0.257 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
MATERIALPLASTIC PHENOLIC AND COTTON OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-15035,TY FBM MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORCIRCULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
C08899Interchangeable
interchangeable cross-reference
interchangeable
49761Interchangeable
interchangeable cross-reference
interchangeable
120 61/64Interchangeable
interchangeable cross-reference
interchangeable
549LXInterchangeable
interchangeable cross-reference
interchangeable
11561Interchangeable
interchangeable cross-reference
interchangeable
54047AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 131463H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 131463H?
131463H is a GASKET.
What parts can replace 131463H?
There are 15 known substitutes for 131463H: C08899, 49761, 120 61/64 and 12 more. Substitute compatibility should be verified for your specific system.
Is 131463H still available?
131463H is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 131463H

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026