PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 131363-010PC20
131363-010PC20 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A MAXIMUM OVERALL, peripheral_diameter: 0.619 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN, center_hole_diameter: 0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-491-7412, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
131363-010PC20
NSN: 5330-00-491-7412
FSC: 5330
CAGE: 99185 — EATON CORPORATION DBA AIRFLEX DIV DIV AIRFLEX (USA)
SPECIFICATIONS
materialRUBBER OVERALL
temp_rating-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A MAXIMUM OVERALL
peripheral_diameter0.619 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
center_hole_diameter0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN
elongation_percentage331 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
cross-sectional_shape_styleO-RING
criticality_code_justificationZZZY
cross_section_outside_diameter0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
reference_number_differentiating_characteristicsMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
NSN5330-00-491-7412
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 131363-010PC20 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 0.619 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 331 MAXIMUM
•
CROSS SECTION OUTSIDE DIAMETER: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZY
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEO-RING
TEMP RATING-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
PERIPHERAL DIAMETER0.619 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
ELONGATION PERCENTAGE331 MAXIMUM
CROSS SECTION OUTSIDE DIAMETER0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZY
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
MATERIALRUBBER OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
N0674 2-014Interchangeable
interchangeable cross-reference
interchangeable
820-4446675-1Interchangeable
interchangeable cross-reference
interchangeable
820-4446652-19Interchangeable
interchangeable cross-reference
interchangeable
2DY800Interchangeable
interchangeable cross-reference
interchangeable
58-03-10Interchangeable
interchangeable cross-reference
interchangeable
2-111N674-70Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 131363-010PC20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 131363-010PC20?
131363-010PC20 is a PACKING,PREFORMED.
What parts can replace 131363-010PC20?
There are 15 known substitutes for 131363-010PC20: N0674 2-014, 820-4446675-1, 820-4446652-19 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 131363-010PC20?
131363-010PC20 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-491-7412. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 131363-010PC20

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026